STPCC5HEBC STMicroelectronics, STPCC5HEBC Datasheet - Page 7

• Manufacturer Part Number: STPCC5HEBC
• Description: IC SYSTEM-ON-CHIP X86 388-PBGA
• Manufacturer: STMicroelectronics
• Series: -r

Specifications of STPCC5HEBC

• Applications: Set-Top Boxes, TV
• Core Processor: x86
• Program Memory Type: External Program Memory
• Controller Series: STPC® Consumer-II
• Ram Size: External
• Interface: EBI/EMI, I²C, IDE, ISA, Local Bus
• Number Of I /o: -
• Voltage - Supply: 2.45 V ~ 3.6 V
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: *
• Package / Case: *
• Lead Free Status / RoHS Status: Not Compliant

- Peripheral timer for detecting lack of peripheral
activity
performance in various power down states of the
system including full power on state.
different planes of the board.
Lack of system activity for progressively longer
period of times is detected by the three power
down timers. These timers can generate SMI
interrupts to CPU so that the SMM software can
put the system in decreasing states of power
consumption. Alternatively, system activity in a
power down state can generate SMI interrupt to
allow the software to bring the system back up to
full power on state. The chip-set supports up to
three power down states: Doze state, Stand-by
state and Suspend mode. These correspond to
decreasing levels of power savings.
Power down puts the STPC Consumer-II into
suspend
- Peripheral activity detection.
- SUSP# modulation to adjust the system
- Power control outputs to disable power from
mode.
The
processor
Release 1.5 - January 29, 2002
completes
execution of the current instruction, any pending
decoded instructions and associated bus cycles.
During the suspend mode, internal clocks are
stopped.
resumes instruction fetching and begins execution
in the instruction stream at the point it had
stopped. Because of the static nature of the core,
no internal data is lost.
1.7. JTAG
JTAG stands for Joint Test Action Group and is the
popular name for IEEE Std. 1149.1, Standard Test
Access Port and Boundary-Scan Architec-ture.
This built-in circuitry is used to assist in the test,
maintenance and support of functional circuit
blocks. The circuitry includes a standard interface
through which instructions and test data are
communicated. A set of test features is defined,
including a boundary-scan register so that a
component is able to respond to a minimum set of
test instructions.
Removing power down, the processor
GENERAL DESCRIPTION
7/93