MPC8349EVVAJFB Freescale, MPC8349EVVAJFB Datasheet - Page 65

• Manufacturer Part Number: MPC8349EVVAJFB
• Manufacturer: Freescale

Specifications of MPC8349EVVAJFB

• Family Name: MPC83xx
• Device Core: PowerQUICC II Pro
• Device Core Size: 32b
• Frequency (max): 533MHz
• Instruction Set Architecture: RISC
• Supply Voltage 1 (typ): 1.2V
• Operating Supply Voltage (max): 1.26V
• Operating Supply Voltage (min): 1.14V
• Operating Temp Range: 0C to 105C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 672
• Package Type: TBGA
• Lead Free Status / RoHS Status: Compliant

Freescale Semiconductor
MVREF2
Notes:
1. This pin is an open-drain signal. A weak pull-up resistor (1 kΩ) should be placed on this pin to OV
2. This pin is an open-drain signal. A weak pull-up resistor (2–10 kΩ) should be placed on this pin to OV
3. During reset, this output is actively driven rather than three-stated.
4. These JTAG pins have weak internal pull-up P-FETs that are always enabled.
5. This pin should have a weak pull-up if the chip is in PCI host mode. Follow the PCI specifications.
6. This pin must always be tied to GND.
7. This pin must always be left not connected.
8. Thermal sensitive resistor.
9. It is recommended that MDIC0 be tied to GND using an 18.2 Ω resistor and MDIC1 be tied to DDR power using an 18.2 Ω
10.TSEC1_TXD[3] is required an external pull-up resistor. For proper functionality of the device, this pin must be pulled up or
11. A weak pull-up resistor (2–10 kΩ) should be placed on this pin to LV
12. For systems that boot from local bus (GPCM)-controlled NOR flash, a pullup on LGPL4 is required.
resistor.
actively driven high during a hard reset. No external pull-down resistors are allowed to be attached to this net.
MPC8349EA PowerQUICC II Pro Integrated Host Processor Hardware Specifications, Rev. 12
Signal
Table 55. MPC8349EA (TBGA) Pinout Listing (continued)
Package Pin Number
AD2
DD1
.
Pin Type
I
DD
Package and Pin Listings
.
DD
reference
Supply
.
voltage
Power
DDR
Notes
—
65