5962-8946805XC E2V, 5962-8946805XC Datasheet - Page 2

• Manufacturer Part Number: 5962-8946805XC
• Manufacturer: E2V

Specifications of 5962-8946805XC

• Lead Free Status / RoHS Status: Supplier Unconfirmed

DSCC FORM 2234
APR 97
accordance with MIL-PRF-38535, appendix A.
1 Generic numbers are listed on the Standard Microcircuit Drawing Source Approval Bulletin at the end of this document and
2/ Lid shall be transparent to permit ultraviolet light erasure.
3/ Must withstand the added P
4/ When the thermal resistance for this case is specified in MIL-STD-1835 that value shall supersede the value indicated
1. SCOPE
1.1 Scope. This drawing describes device requirements for MIL-STD-883 compliant, non-JAN class level B microcircuits in
1.2 Part or Identifying Number (PIN). The complete PIN is as shown in the following example:
1.2.1 Device type(s). The device type(s) identify the circuit function as follows:
1.2.2 Case outline(s). The case outline(s) are as designated in MIL-STD-1835 and as follows:
1.2.3 Lead finish. The lead finish is as specified in MIL-PRF-38535, appendix A.
1.3 Absolute maximum ratings.
1.4 Recommended operating conditions.
Supply voltage to ground potential -----------------------
DC Input voltage ----------------------------------------------
Maximum power dissipation 3/ ---------------------------
Lead temperature (soldering, 10 seconds)-------------
Thermal resistance, junction-to-case (θ
Junction temperature (T
Storage temperature range --------------------------------
Temperature under bias ------------------------------------
Endurance------------------------------------------------------
Data retention -------------------------------------------------
Supply voltage (V
Ground voltage (GND) -------------------------------------
Input high voltage (V
Input low voltage (V
Case operating temperature range (T
will also be listed in MIL-HDBK-103.
herein.
Case outlines X and Y -------------------------------------
Case outline Z -----------------------------------------------
Drawing number
DEFENSE SUPPLY CENTER COLUMBUS
Device type
5962-89468
Outline letter
MICROCIRCUIT DRAWING
COLUMBUS, OHIO 43218-3990
01
02
03
04
05
X
Y
Z
CC
STANDARD
) ----------------------------------------
IL
IH
) --------------------------------------
) -------------------------------------
J
) ----------------------------------
D
Generic number 1/
Descriptive designator
Device type
due to short circuit test (e.g., I
(see 1.2.1)
GQCC1-J68
See figure 1
CMGA15-PN
01
C
) ---------------
JC
):
Case outline
(see 1.2.2)
X
128-Macrocell EPLD
128-Macrocell EPLD
128-Macrocell EPLD
128-Macrocell EPLD
128-Macrocell EPLD
2.0 V dc to +7.0 V dc
2.0 V dc to +7.0 V dc
2.5 W
+260°C
See MIl-STD-1835
10°C/W 4/
+175°C
-65°C to +150°C
-55°C to +125°C
25 erase/write cycles (minimum)
10 years minimum
+4.5 V dc to +5.5 V dc
0 V dc
2.2 V dc minimum
0.8 V dc maximum
-55°C to +125°C
Terminals
SC
Circuit function
68
68
68
).
SIZE
A
Lead finish
(see 1.2.3)
J-leaded chip carrier 2/
pin grid array package 2/
quad flat package 2/
A
Package style
REVISION LEVEL
C
Propagation Delay
35 ns
30 ns
25 ns
20 ns
15 ns
SHEET
5962-89468
2