E2K-X4ME2 5M Omron, E2K-X4ME2 5M Datasheet - Page 14

• Manufacturer Part Number: E2K-X4ME2 5M
• Description: Proximity Sensors E2K-X4ME2 W/ 5 METER CABLE
• Manufacturer: Omron
• Series: E2K-Xr
• Type: Proximity Sensorr

Specifications of E2K-X4ME2 5M

• Proximity Sensor Sensing Distance: 4mm
• Proximity Sensor Sensing Distance Range: 2 to 7mm
• Proximity Sensor Switching Mode: NC
• Mounting: Panel
• Operating Temp Range: -25C to 70C
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 10V
• Operating Supply Voltage (typ): 12/15/18/24V
• Operating Supply Voltage (max): 30V
• Pin Count: 3
• Output Type: NPN
• Maximum Operating Temperature: + 70 C
• Supply Voltage: 12 VDC to 24 VDC
• Supply Current: 15 mA
• Output Voltage: 1 V
• Operating Supply Voltage: 10 VDC to 30 VDC
• Mounting Style: Panel
• Sensing Distance: 4 mm
• Minimum Operating Temperature: - 25 C
• Current Rating: 200 mA
• Features: Permits non-contact detection of metallic and non-metallic objects
• Voltage Rating: 24 VDC
• Lead Free Status / RoHS Status: Supplier Unconfirmed

●Operating Environment
Water Resistance
Do not use the Sensor in water, rain, or outdoors.
Ambient Conditions
Do not use the Sensor in the following environments.
Doing so may cause malfunction or failure of the Sensor.
1. To maintain operational reliability and service life, use the Sensor
2. The Sensor has a water resistant structure, however, attaching a
3. Avoid using the Sensor where there are chemical vapors,
●Maintenance and inspection
Periodic Inspection
To ensure long-term stable operation of the Proximity Sensor, inspect
for the following on a regular basis. Conduct these inspections also
for control devices.
1. Shifting, loosening, or deformation of the sensing object and
2. Loosening, bad contact, or wire breakage in the wiring and
3. Adherence or accumulation of metal powder
4. Abnormal operating temperature or ambient conditions
5. Abnormal indicator flashing (on setting indicator types)
Disassembly and Repair
Do not under any circumstances attempt to disassemble or repair the
product.
Quick Failure Check
You can conveniently check for failures by connecting the E39-VA
Handy Checker to check the operation of the Sensor.
only within the specified temperature range and do not use it
outdoors.
cover to prevent direct contact with water will help improve
reliability and prolong product life.
especially strong alkalis or acids (nitric acid, chromic acid, or hot
concentrated sulfuric acid).
Proximity Sensor mounting
connections
http://www.ia.omron.com/
Proximity Sensors Technical Guide
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
C-8