LM8M64R Sharp Electronics, LM8M64R Datasheet - Page 7

• Manufacturer Part Number: LM8M64R
• Manufacturer: Sharp Electronics

Specifications of LM8M64R

• Lead Free Status / RoHS Status: Compliant

13) Procedure insert mating connector
14) This specification describes display quality in case of no gray scale. Since display quality can be affected by
15) The module should be driven according to the specified ratings to avoid permanent damage.
When the mating connector is attempted to be fixed to LCD connector, it should be inserted properly in order
Please insert the connector as both edge is placed to the connect position of LCD connector.
gray scale methods, display quality shall be carefully evaluated for the usability of LCD module in case gray
scale is displayed on the LCD module.
should be inserted horizontally.
not to create a gap as shown “A”.
DC voltage drive leads to rapid deterioration of LC, so ensure that the drive is alternating waveform by
continuous application of the signal M. Especially the power ON/OFF sequence shown on Page 24 should be
kept to avoid latch-up of drive LSIs and application of DC voltage to LCD panel.
When the mating connector is inserted, it should be parallel to the used connector of LCD module and it
Parallel
LCD Connector
SPEC No.
LC9
LC9
LC9
LC98109A
LCD Connector
8109A
8109A
8109A
MODEL No.
LM
LM8M64
LM
LM
Ａ
8M64
8M64
8M64
LCD Connector
PAGE
3 3 3 3