EVAL-CN0160-EB1Z Analog Devices Inc, EVAL-CN0160-EB1Z Datasheet - Page 4

• Manufacturer Part Number: EVAL-CN0160-EB1Z
• Description: BOARD, EVAL, FOR CN0160
• Manufacturer: Analog Devices Inc
• Type: USB Peripheral Isolatorr
• Series: -r

Specifications of EVAL-CN0160-EB1Z

• Kit Contents: Board
• Mcu Supported Families: CN0160
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Silicon Manufacturer: Analog Devices
• Silicon Core Number: CN0160
• Design Resources: USB Peripheral Isolator Circuit (CN0160)
• Main Purpose: Interface, Isolator USB Peripheral
• Embedded: No
• Utilized Ic / Part: ADuM4160, ADP3338
• Primary Attributes: -
• Secondary Attributes: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Circuit Note
A photo of a typical application circuit is shown in Figure 4.
The
connected to the evaluation board for the
12-/10-/8-bit ADC with I
evaluation board acts as a peripheral, which interfaces to a PC
(for test and evaluation of the ADC) via the USB port. This
provides total isolation between the ADuM4160 USB port and
the ADC evaluation board.
Because of the fast edge speeds associated with this circuit,
excellent layout, decoupling, and grounding techniques
must be employed in order to pass system EMI/RFI tests.
See
Application Note
package for this circuit note can be found at
http://www.analog.com/CN0160-DesignSupport.
COMMON VARIATIONS
Other linear regulators can be substituted depending on
system requirements. See the
for details.
CIRCUIT EVALUATION AND TEST
The ADuM4160 evaluation board isolation adapter described
in this note is used for evaluation and testing. A detailed
schematic and a picture of the circuit boards used in the test
setup are shown in Figure 1 and Figure 4.
Tutorial
ADuM4160
6V FROM WALLWART
TO PC
MT-031,
USB
for guidance. A complete design support
evaluation board (left side of photo) is
ADuM4160 EVALUATION BOARD
Tutorial
ISOLATION ADAPTER
2
Figure 4. Photo of ADuM4160 USB Evaluation Board Connected to USB Port of AD7991 Evaluation Board
C compatible interface. The ADC
ISOLATION BARRIER
ADIsimPower™ design tool
MT-101, and the
AD7991
AN-0971
4-channel,
Rev. A | Page 4 of 5
Equipment Needed
The following equipment is needed: a PC with Windows® XP or
Vista, a USB data port connection, the ADuM4160 evaluation
board isolation adapter, the EVAL-7991EBZ evaluation board
and AD7991 evaluation software, two USB cables, and a high
speed digital oscilloscope.
Getting Started
In addition to the circuit and schematic of the test setup described
in this Circuit Note, details regarding the ADuM4160 evaluation
board isolation adapter, including schematics, Gerber’s, and bill
of materials, are available at
DesignSupport.
Functional Block Diagram
See Figure 1 for the schematic diagram and other information
regarding the described test setup.
AD7991 EVALUATION BOARD
http://www.analog.com/CN0160-
CN-0160