SK-16FX-48PMC Fujitsu, SK-16FX-48PMC Datasheet - Page 10

• Manufacturer Part Number: SK-16FX-48PMC
• Description: KIT, EVALUATION, FOR MB96310 SERIES
• Manufacturer: Fujitsu

Specifications of SK-16FX-48PMC

• Silicon Manufacturer: Fujitsu
• Core Architecture: 16FX
• Silicon Core Number: MB96F315RSA
• Silicon Family Name: MB96310
• Kit Contents: Evaluation Board, USB Cable, RS232 Cable, Mini CD
• Features: UART
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Fujitsu Microelectronics Europe - http://emea.fujitsu.com/microelectronics
The Hardware
S1: Mode selection
PROG:
RUN:
JP3: DTR-Reset
Set the jumper to 1-2 to connect
the DTR-Signal
of the UART connector to the
microcontroller reset-pin.
Set the jumper to 2-3 to connect
the DTR-Signal
of the USB connector to the
microcontroller reset-pin.
Some terminal-programs, e.g.
Fujitsu‘s Skwizard, allow to reset
the evaluation board by using the
DTR-Signal.
JP6: MD0 selection
Close this jumper to control the
MD0 level by the RTS signal of the
USB interface
The jumpers
Select the run-mode
Select the program-mode
JP4: UART RX select
R-7R: UART7_R=UART‘A‘ / U-2: UART2=UART‘B‘ (USB)
R-2: UART2=UART‘A‘ / U-7R: UART7_R=UART‘B‘ (USB)
JP9: MCU Vcc
This jumper can be used to measure
the current consumption of the MCU
JP10: 5V / 3.3V
1-2: 5V supply is used
2-3: 3.3V supply is used
JP5: UART TX select
R-7R: UART7_R=UART‘A‘ / U-2: UART2=UART‘B‘ (USB)
R-2: UART2=UART‘A‘ / U-7R: UART7_R=UART‘B‘ (USB)
All Rights Reserved.© Fujitsu Limited 2009
JP11: Power Supply
1-2: USB supply is used
2-3: External supply is used
10