MS-166-HRMJ-1 HRS (HIROSE), MS-166-HRMJ-1 Datasheet

no-image

MS-166-HRMJ-1

Manufacturer Part Number
MS-166-HRMJ-1
Description
COAXIAL SWITCH, SMA, MS-166
Manufacturer
HRS (HIROSE)
Datasheet

Specifications of MS-166-HRMJ-1

Connector Type
SMA, Coaxial
Coaxial Termination
Solder
Impedance
50ohm
Contact Material
Beryllium Copper
Contact Plating
Gold
Frequency Max
8GHz
Connector Mounting
PCB
Svhc
No SVHC (15-Dec-2010)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
Overview
Features
Applications
Developed for inspection of high frequency circuits used in
portable terminals.Verification of the circuit performance is
accomplished by simply inserting the external plug in the
board mounted receptacle.This action re-directs the circuit
from normal condition to the plug side. Removing the plug
restores circuit to its normal condition.
1. Low insertion loss
2. Space-saving design
3. Low profile
4. Lightweight
5. Miniaturization of Equipment Holes
6. Durability
7. Performs over a wide frequency range
8. Board placement with automatic equipment
9. RoHS compliant
Portable terminals, ETC, notebook computers (Bluetooth),
wireless LAN, POS terminals, GPS terminals, PDA, and any
small devices requiring verification of antenna/circuit
performance.
NEW
NEW
0.15 dB typical at 2.5 GHz (not mated with the plug).
0.2 dB typical at 6 GHz (not mated with the plug).
0.4 dB typical at 11 GHz (not mated with the plug).
2.3 mm x 2.3 mm occupied board space.
1.2 mm protrusion above the board.
0.016 g. total weight (without vacuum cap).
The outside diameter of the tip of the plug connectors is a
narrow 2.8 mm which permits a great reduction in the size
of the equipment holes.
50 mating/unmating cycles, with corresponding plug.
Applicable frequencies range over a wide band,
from DC to 11 GHz.
Packaged on tape-and-reel. Also available with a
vacuum pick-up cap over each switch.
All components and materials comply with the
requirements of the EU Directive 2002/95/EC.
Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
MS-166 Series
Space-saving design
Low profile -1.2 mm protrusion above the board.
Lightweight -0.016 g. total weight.
Comparison with the existing MS-156HF
●SMA conversion adapters
■Footprint
■Height
■Weight
MS-156HF
0.025g
2.7
22% saving of space
36% lighter weight
25% lower profile
0.35
0.016g
MS-166
2008.5
2.3
0.5
1

Related parts for MS-166-HRMJ-1

MS-166-HRMJ-1 Summary of contents

Page 1

... The outside diameter of the tip of the plug connectors is a narrow 2.8 mm which permits a great reduction in the size of the equipment holes. 6. Durability 50 mating/unmating cycles, with corresponding plug. 7. Performs over a wide frequency range Applicable frequencies range over a wide band, from GHz. 8. Board placement with automatic equipment Packaged on tape-and-reel. Also available with a vacuum pick-up cap over each switch ...

Page 2

... Phosphor bronze Gold plated LCP —————— Polyamide Beryllium copper Partially gold plated Phosphor bronze Partially gold plated Open Mated with (MS-166-HRMJ- 8GHz 1.4 max. (DC to 3GHz) 1.8 max. (3GHz to 8GHz) 0.5 dB max. (DC to 3GHz) 0.7 dB max. ...

Page 3

... MS-166 Series●Subminiature Coaxial Switch 1.2 mm High GHz Insertion Loss V.S.W. Insertion Loss V.S.W. Isolation 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2 ...

Page 4

... The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-166 Series●Subminiature Coaxial Switch 1.2 mm High GHz ■Receptacle ...

Page 5

... It might cause degradation or destruction of the product. Even if it endures during a short time, long time quarification is not quaranteed. 8. Exercise caution as not to allow any debris to enter the board mounted MS-166 when cutting PCB. MS-166 Series●Subminiature Coaxial Switch 1.2 mm High GHz ...

Page 6

... The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. MS-166 Series●Subminiature Coaxial Switch 1.2 mm High GHz BRecommended Temperature profile Temperature (ç ...

Page 7

... The service life has a plug connector single item guaranty and not the guaranty associated with the same receptacle. MS-166 Series●Subminiature Coaxial Switch 1.2 mm High GHz (27.15) 18.65 8.5 17.65 1 6.75 6.62 1/4-36UNS-2A Part Number CL No. MS-166-HRMJ-1 358-0239-7 (34.15) 7.86 26.29 6.75 6.62 10.42 2.5 6.3 1/4-36UNS-2A Part Number CL No. ...

Related keywords