MS-166-HRMJ-1 HRS (HIROSE), MS-166-HRMJ-1 Datasheet - Page 5

• Manufacturer Part Number: MS-166-HRMJ-1
• Description: COAXIAL SWITCH, SMA, MS-166
• Manufacturer: HRS (HIROSE)

Specifications of MS-166-HRMJ-1

• Connector Type: SMA, Coaxial
• Coaxial Termination: Solder
• Impedance: 50ohm
• Contact Material: Beryllium Copper
• Contact Plating: Gold
• Frequency Max: 8GHz
• Connector Mounting: PCB
• Svhc: No SVHC (15-Dec-2010)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
BPrecautions
1. Do not use the washing process.
2. This product is intended to be used for circuit inspection only. Consult us if any other application
3. Plugs can be roughly classified to two types.
4. Do not use hand soldering for mounting of MS-166.
5. When using a heat gun, hot plate, or similar methods, limit the temperature to 260 ç applied
6. Cross-hatched area shown on the PCB mounting pattern must be free of any conducive traces.
7. Please refrain from using the product in environments specifically affected by excessive
8. Exercise caution as not to allow any debris to enter the board mounted MS-166 when cutting
is considered.
- For mass production line automatic check (Press down type)
- For manual check (With retentive lock) : Unable to be used at production line.
for 10 seconds max.
Placing conductive traces in this area may affect performance and will void product warranties.
When the bottom surface of the product (i.e., the
dimensions diagram on the previous page) has been processed with a susbtrate copper trace
and resist processing, Hirose Electric will not be able to warrant the product.
vibration, shock, dust, high humidity, gases, very high temperatures and very low temperatures
such as outdoor equipment. It might cause degradation or destruction of the product. Even if it
endures during a short time, long time quarification is not quaranteed.
PCB.
Doing so could result in solder and flux wicking to the contact areas.
MS-166 Series●Subminiature Coaxial Switch 1.2 mm High, DC to 11 GHz
shaded area of the specified land
5