Y92S-41-200 Omron, Y92S-41-200 Datasheet - Page 24

• Manufacturer Part Number: Y92S-41-200
• Description: CABLE DISCRETE OUTPT 2M FOR H8PS
• Manufacturer: Omron

Specifications of Y92S-41-200

• Accessory Type: Cable
• For Use With/related Products: H8PS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Y92S41200

Operation (Run Mode)
Starting Operation
Switching the Angle and Speed Displays
Start input
indication
(See note.)
display positions of the present angular position and speed (r/min)
between main display and sub-display.
Press the
Set the mode switch to RUN to start operation.
1
1
2
2
CAM
ON
Note: For 16/32-output models, be sure that the start input is ON
1
2
OFF
7
7
PRGM
and that the start input indicator is lit. Outputs (including
the cam, pulse, and run outputs) will not function if the
start input is OFF. The 8-output models do not have a
start input.
TEST
RUN
Press the
Mode
Key for at least 1 s in Run Mode to reverse the
STEP
7
ON
RUN
RUN
OFF
Key for 1 s min.
Present angular position on main display
Speed (r/min) on sub-display
Speed (r/min) on main display
Present angular position on sub-display
RUN
Present angular position
Speed (r/min)
All Protection Function
The all protection function locks the H8PS in Run Mode and prohibits
any changes to settings. It can be used to prevent incorrect or
unauthorized operation. If the
Run Mode, the All Protection indicator
and all keys and switches will be disabled. If the mode switch is
changed to Programming or Test Mode while protection is enabled,
the All Protection indicator
cannot be changed. If a setting on the DIP switch is changed while
protection is enabled, the All Protection indicator
the power supply is turned ON to indicate that settings cannot be
changed.
Checking ON/OFF Angle Settings
• During Run Mode, the CAM Keys
All Protection Function Disabled (Normal Operation)
All Protection Function Enabled
CAM
CAM
can be used to check the ON/OFF angle settings for any step. Also,
the
settings in order for all steps starting from cam 1. If there is no key
operation for 10 s or longer during the checking operation, the
previous display will be resumed.
1
1
2
2
CHECK
4
4
5
5
STEP
STEP
6
6
Key can be pressed to check the ON/OFF angle
Press the
ADV
RUN
RUN
Key for 5 s min.
ADV
will flash to indicate that settings
All protection indication
Key is pressed for at least 5 s in
and STEP Keys
will light on the display
will flash when
H8PS
24