104479-9 TE Connectivity, 104479-9 Datasheet - Page 2

• Manufacturer Part Number: 104479-9
• Description: SHORT POINT CONT 15 DPLX STMPD LF
• Manufacturer: TE Connectivity

Specifications of 104479-9

• Rohs Compliant: YES
• Product Type: Contact
• Termination Method To Wire/cable: Crimp
• Wire Insulation Diameter (mm [in]): 0.64 – 1.52 [0.025 – 0.060]
• Connector Series: Short Point
• With Insulation Support: Yes
• Applied Pressure: Standard
• Contact - Rated Current (a): 3
• Voltage Rating (vac): 300
• Termination Resistance (m?): 12
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 750
• Crimp Area Plating: Bright Tin
• Wire Range (mm [awg]): 0.20-0.60² [24-20]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Gold (15)
• Contact Base Material: Copper Alloy C7025
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Applies To: Wire/Cable
• Packaging Method: Strip

3.4.
3.5.
Examination of product.
Termination resistance.
Temperature rise vs current.
Vibration, random.
Temperature life.
Mixed flowing gas.
Rev B
NOTE
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 1. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per Test Specification 109-1.
Test Requirements and Procedures Summary
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
Meets requirements of product
drawing and AMP Spec 114-25038.
15 milliohms maximum initial.
20 milliohms maximum final.
30EC maximum temperature rise at
specified current.
See Note.
See Note.
See Note.
ENVIRONMENTAL
MECHANICAL
ELECTRICAL
Requirement
Figure 1
Visual, dimensional and functional
per applicable quality inspection
plan.
TE 109-6-6.
Subject mated contacts assembled
in housing to 20 mv maximum open
circuit at 100 ma maximum.
See Figure 3.
TE Spec 109-45-2.
Measure temperature rise vs
current.
See Figure 4.
TE Spec 109-21-7.
Subject mated samples to 5-500
Hz. 15 minutes in each of 3
mutually perpendicular planes.
See Figure 5.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for 500
hours.
TE Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1472-1
2 of 6