104483-8 TE Connectivity, 104483-8 Datasheet - Page 3

• Manufacturer Part Number: 104483-8
• Description: 64 SHORT PT RCPT HSG DR .100CL
• Manufacturer: TE Connectivity
• Series: Short Point Seriesr

Specifications of 104483-8

• Rohs Compliant: YES
• Product Type: Receptacles / Sockets - Housings
• Contact Gender: Socket (Female)
• Pitch: 2.54 mm
• Number Of Positions / Contacts: 64
• Number Of Rows: 2
• Row Spacing: 2.54 mm
• Mounting Style: Wire
• Termination Style: Crimp
• Housing Material: Thermoplastic, Glass Filled
• Voltage Rating: 300 VAC
• Current Rating: 3 A
• Operating Temperature Range: - 65 C to + 105 C
• Connector Type: Housing
• Termination Method To Wire/cable: Crimp
• Mating Connector Lock: Without
• Connector Series: Short Point
• Keyed: No
• Flame Retardant: Yes
• Housing Configuration: Both Ends Closed
• Contact - Rated Current (a): 3
• Voltage Rating (vac): 300
• Termination Resistance (m?): 12
• Insulation Resistance (m?): 5,000
• Dielectric Withstanding Voltage (v): 750
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Positions: 64
• Contact Type: Socket
• Connector Style: Receptacle
• Mating Alignment: With
• Mating Alignment Type: Polarizing Tab
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Approved Standards: UL E28476, CSA LR7189
• Operating Temperature (°c): -65 – +105
• Lead Free Status / Rohs Status: Details

Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
Rev A
NOTE
Test Description
Shall meet visual requirements, show no physical damage and shall meet requirements of
additional tests as specified in Test Sequence in Figure 2.
9 ounces maximum for gold
contacts.
21 ounces maximum for tin
contacts.
1.5 ounces minimum.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
TE Spec 109-42, Condition A.
Measure force necessary to mate
samples at maximum rate of 1 inch
per minute.
TE Spec 109-42, Condition A.
Measure force necessary to unmate
samples at maximum rate of 1 inch
per minute.
TE Spec 109-22.
Subject mated samples to 5 cycles
between -65 and 105° C.
TE Spec 109-23-3, Condition B.
Subject mated samples to 10 cycles
between 25 and 65° C at 95% RH.
TE Spec 109-43.
Subject mated samples to
temperature life at 105° C for 500
hours.
TE Spec 109-85-3.
Subject mated samples to
environmental class III for 20 days.
Procedure
108-1472
3 of 6