1375961-2 TE Connectivity, 1375961-2 Datasheet - Page 3

• Manufacturer Part Number: 1375961-2
• Description: PC104 CONN NONSTKTHRGH 2 STDOF
• Manufacturer: TE Connectivity

Specifications of 1375961-2

• Rohs Compliant: NO
• Product Type: Non-Stackthrough
• Termination Style: Screw
• Housing Material: Nylon, Glass Filled
• Contact Material: Phosphor Bronze
• Contact Plating: Gold
• Number Of Standoffs: 2
• Pitch: 2.54 mm
• Keyed: No
• Pcb Mount Style: Through Hole
• Board Standoff: With
• Screw Material: Steel
• Gender: Receptacle
• Screw Plating: Zinc Chromate
• Signal Contact Current (a): 3
• Insulation Resistance (m?): 1,000
• Dielectric Withstanding Voltage (v): 500
• Termination Post Length (mm [in]): 3.02 [0.119]
• Number Of Positions: 104
• Number Of Loaded Positions: 104
• Centerline (mm [in]): 2.54 [0.100]
• Pcb Mount Retention Type: None
• Contact Configuration: Non-Stackthrough
• Contact Base Material: Phosphor Bronze
• Contact Plating, Mating Area, Material: Gold
• Housing Color: Black
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: Not ELV/RoHS compliant
• Lead Free Solder Processes: Wave solder capable to 240°C
• Temperature Range (°c): -55 – +105
• Lead Free Status / Rohs Status: No

Rev C
Durability.
Mating force.
Unmating force.
Thermal shock.
Humidity-temperature cycling.
Temperature life.
Mixed flowing gas.
NOTE
Test Description
Shall meet visual requirements, show no physical damage, and meet requirements of additional
tests as specified in the Product Qualification and Requalification Test Sequence shown in Figure
2.
See Note.
142.3 N [32 lb] maximum for
PC/104.
151.2 N [34 lb] maximum for
PC/104-Plus.
66.72 N [15 lb] minimum for
PC/104.
80.07 N [18 lb] minimum for
PC/104-Plus.
See Note.
See Note.
See Note.
See Note.
ENVIRONMENTAL
Figure 1 (end)
Requirement
EIA-364-9.
Manually mate and unmate
specimens for 50 cycles.
EIA-364-13.
Measure force necessary to mate
specimens at a maximum rate of
12.7 mm [.5 in] per minute.
EIA-364-13.
Measure force necessary to
unmate specimens at a maximum
rate of 12.7 mm [.5 in] per minute.
EIA-364-32.
Subject mated specimens to 5
cycles between -55 and 105° C.
EIA-364-31.
Subject mated specimens to 10, 24
hour cycles between 25 and 65° C
at 95% RH.
EIA-364-17.
Subject mated specimens to 105° C
for 500 hours.
EIA-364-65.
Subject mated specimens to
environmental Class IIA for 14
days.
Procedure
108-1956
3 of 6