DS1073Z-270 Maxim Integrated Products, DS1073Z-270 Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/4/417/maxim_integrated_products_sml.jpg)
DS1073Z-270
Manufacturer Part Number
DS1073Z-270
Description
ECONOSCILLATOR/DIV 270MHZ 8-SOIC
Manufacturer
Maxim Integrated Products
Series
EconOscillator™r
Type
Oscillator, Fixed Frequency, Dualr
Datasheet
1.DS1073Z-270.pdf
(12 pages)
Specifications of DS1073Z-270
Frequency
270MHz
Voltage - Supply
2.7 V ~ 3.6 V
Current - Supply
25mA
Operating Temperature
-40°C ~ 85°C
Package / Case
8-SOIC (3.9mm Width)
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Count
-
DS1073
POWER-DOWN CONTROL
POWER-DOWN
If PDN is taken low a power-down sequence is initiated. The “Enabling Sequencer” is used to execute
events in the following sequence:
1. Disable OUT1 (same sequence as when OE is used) and reset N counters.
2. When OUT1 is low, switch OUT1 to high-impedance state.
3. Disable MCLK, switch OUT0 to high impedance state.
4. Disable master oscillator.
POWER-UP
When PDN is taken to a high level the following power-up sequence occurs:
1. Enable internal oscillator.
2. Set M and N to maximum values.
3. Wait approximately 256 cycles of MCLK for it to stabilize.
4. Reset M and N to programmed values.
5. Enable OUT0 ( if enabled)
6. Enable OUT1.
Steps 2 through 4 exist to allow the oscillator to stabilize before enabling the outputs.
Figure 5
6 of 12