DS1744P-70+ Maxim Integrated Products, DS1744P-70+ Datasheet - Page 4
![IC RTC RAM Y2K 5V 70NS 34-PCM](/photos/6/58/65856/406-34-pcm_sml.jpg)
DS1744P-70+
Manufacturer Part Number
DS1744P-70+
Description
IC RTC RAM Y2K 5V 70NS 34-PCM
Manufacturer
Maxim Integrated Products
Type
Clock/Calendar/NVSRAM/Y2Kr
Datasheet
1.DS1744W-120.pdf
(16 pages)
Specifications of DS1744P-70+
Memory Size
256K (32K x 8)
Time Format
HH:MM:SS (24 hr)
Date Format
YY-MM-DD-dd
Interface
Parallel
Voltage - Supply
4.5 V ~ 5.5 V
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
34-PowerCap™ Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
DS1744/DS1744P Y2K-Compliant, Nonvolatile Timekeeping RAMs
Figure 1. DS1744/DS1744P Block Diagram
DS1744/DS1744P
PACKAGES
The DS1744 is available in two packages (28-pin encapsulated DIP and 34-pin PowerCap module). The
28-pin EDIP module integrates the crystal, lithium energy source, and silicon all in one package. The 34-
pin PowerCap module board is designed with contacts for connection to a separate PowerCap
(DS9034PCX) that contains the crystal and battery. This design allows the PowerCap to be mounted on
top of the DS1744P after the completion of the surface-mount process. Mounting the PowerCap after the
surface-mount process prevents damage to the crystal and battery due to the high temperatures required
for solder reflow. The PowerCap is keyed to prevent reverse insertion. The PowerCap module board and
PowerCap are ordered separately and shipped in separate containers. The part number for the PowerCap is
DS9034PCX.
CLOCK OPERATIONS—READING THE CLOCK
While the double-buffered register structure reduces the chance of reading incorrect data, internal updates
to the DS1744 clock registers should be halted before clock data is read to prevent reading of data in
transition. However, halting the internal clock register updating process does not affect clock accuracy.
Updating is halted when a 1 is written into the read bit, bit 6 of the century register (Table 2). As long as a
1 remains in that position, updating is halted. After a halt is issued, the registers reflect the count, that is,
day, date, and time that was current at the moment the halt command was issued. However, the internal
clock registers of the double-buffered system continue to update so that the clock accuracy is not affected
by the access of data. All the DS1744 registers are updated simultaneously after the internal clock-register
updating process has been re-enabled. Updating is within a second after the read bit is written to 0. The
READ bit must be a 0 for a minimal of 500s to ensure the external registers are updated.
4 of 16