281792-4 TE Connectivity, 281792-4 Datasheet - Page 23

• Manufacturer Part Number: 281792-4
• Description: PLUG HE14 IDC 180 2X4 P AWG 28-26
• Manufacturer: TE Connectivity
• Series: HE14r

Specifications of 281792-4

• Connector Type: Wire To Board
• Contact Termination: IDC / IDT
• Gender: Receptacle
• No. Of Contacts: 8
• No. Of Rows: 2
• Pitch Spacing: 2.54mm
• Contact Plating: Tin
• Rohs Compliant: Yes
• Product Type: Connector
• Termination Method To Wire/cable: Crimp, Insulation Displacement Crimp (IDC)
• Mating Connector Lock: Without
• Wire Insulation Diameter (mm [in]): 1.00 [0.039]
• Connector Series: HE13 / HE14
• Keyed: No
• Centerline (mm [in]): 2.54 [0.100]
• Row-to-row Spacing (mm [in]): 2.54 [0.100]
• Number Of Positions: 8
• Number Of Rows: 2
• Wire Range (mm [awg]): 0.08-0.15² [28-26]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Tin
• Contact Base Material: Phosphor Bronze
• Connector Style: Receptacle
• Mating Alignment: Without
• Housing Color: Blue
• Ul Flammability Rating: UL 94V-0
• Housing Material: PBT - GF
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Wire/Cable
• Packaging Method: Loose Piece

2 to 2
5. INSPECTION
5.1. wire
No strand should be cut after termination. The dimensions of figure 3 must be met.
The wire should be located in a way that allow the housing lances to go back to their initial position (figure 4 and 4a).
If the insulating is stripped, only the area A is to be affected.
5.2. Contacts
No visible deformation should affect the contacts after termination.
5.3. Housing
The housing should not be damaged or craked after termination.
The lances should approximately have returned to their initial position.
Connector part number
x-281 714-x
x-281 715-x
x-281 711-x
x-281 712-x
x-281 708-x
x-281 709-x
Figure 4a
correct
Figure 4
wrong
Marking
code
IDC PLUG 90° HE13-HE14 SERIES- IEC 603-8
8
8
6
6
4
4
AWG gage
MIN D. = WIRE DIAMETER
28
28
26
26
24
24
Table of part numbers
Conductor
0.08 mm
0.08 mm
0.12 mm
0.12 mm
0.22 mm
0.22 mm
section
2
2
2
2
2
2
Max insulation
diameter (mm)
Figure 3
0.86
0.86
1.0
1.0
1.2
1.2
diameter (inch)
Max insulation
0.34
0.34
0.39
0.39
0.47
0.47
Designation
KY 30-02
KY 30-02
KY 30-03
KY 30-03
KY 30-04
KY 30-04
Wires
114-15030
Rev. B