4-641216-6 TE Connectivity, 4-641216-6 Datasheet - Page 4

• Manufacturer Part Number: 4-641216-6
• Description: 16P MTA100 HDR ASSY FL/RA LF
• Manufacturer: TE Connectivity
• Series: MTA-100 Seriesr

Specifications of 4-641216-6

• Product Type: Headers - Pin Strip
• Contact Gender: Pin (Male)
• Pitch: 2.54 mm
• Number Of Positions / Contacts: 16
• Number Of Rows: 1
• Mounting Style: PCB
• Mounting Angle: Right
• Latching Type: Friction Lock
• Termination Style: Through Hole
• Housing Material: Polyester
• Contact Material: Copper Alloy
• Contact Plating: Gold (30)
• Voltage Rating: 250 VAC
• Current Rating: 5 A
• Connector Type: Header
• Product Line: MTA-100
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: Without
• Mating Connector Lock: With
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Mating Connector Lock Type: Friction Lock
• Post Size (mm [in]): 0.64 [.025]
• Panel Mount Retention: Without
• Voltage Rating (vac): 250
• Solder Tail Contact Plating: Tin
• Termination Post Length (mm [in]): 3.56 [0.140]
• Number Of Positions: 16
• Centerline (mm [in]): 2.54 [0.100]
• Narrow: No
• Post Number(s) Omitted: None
• Solder Tail Contact Material: Copper Alloy
• Contact Type: Pin
• Contact Shape: Square
• Contact Plating, Mating Area, Material: Gold (30) or (30) Total Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Connector Style: Plug
• Housing Color: White
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-0
• Backwall/post Interruption(s): Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application Use: Wire-to-Board
• Lead Free Status / Rohs Status: Details

3.6.
Rev H
Product Qualification and Requalification Test Sequence
NOTE
(a) See paragraph 4.1.A.
(b) Numbers indicate sequence in which tests are performed.
(c)
(d) Gold plated samples.
(e) Discontinuities shall not be measured. Energize at 18
(f)
(g) Precondition samples with 5 cycles durability.
Examination of product
Termination resistance
Insulation resistance
Dielectric withstanding voltage
Temperature rise vs current
Solderability
Termination tensile strength
Vibration
Physical shock
Durability
Mating force
Unmating force
Thermal shock
Humidity-temperature cycling
Temperature life
Mixed flowing gas
Tin-lead plated samples.
Test Specification 109-151.
Subject half the samples to the parallel tensile test and the remaining half to the
perpendicular tensile test.
Test or Examination
Figure 2
1,9
3,7
1
5
6
4
2
8
2(c)
6(e)
4(g)
1,9
2,7
3,8
5
Test Sequence (b)
Test Group (a)
3(d)
3(g)
1,5
2,4
1,8
2,6
3,7
4
4
5
E
C level for 100% loadings per
2(f)
1,3
5
1,3
6
2
108-1050
4 of 9