4-641216-6 TE Connectivity, 4-641216-6 Datasheet - Page 6

• Manufacturer Part Number: 4-641216-6
• Description: 16P MTA100 HDR ASSY FL/RA LF
• Manufacturer: TE Connectivity
• Series: MTA-100 Seriesr

Specifications of 4-641216-6

• Product Type: Headers - Pin Strip
• Contact Gender: Pin (Male)
• Pitch: 2.54 mm
• Number Of Positions / Contacts: 16
• Number Of Rows: 1
• Mounting Style: PCB
• Mounting Angle: Right
• Latching Type: Friction Lock
• Termination Style: Through Hole
• Housing Material: Polyester
• Contact Material: Copper Alloy
• Contact Plating: Gold (30)
• Voltage Rating: 250 VAC
• Current Rating: 5 A
• Connector Type: Header
• Product Line: MTA-100
• Pcb Mounting Orientation: Right Angle
• Pcb Mount Retention: Without
• Mating Connector Lock: With
• Four Points Of Contact: Without
• Shrouded: No
• Mounting Ears: Without
• Mating Connector Lock Type: Friction Lock
• Post Size (mm [in]): 0.64 [.025]
• Panel Mount Retention: Without
• Voltage Rating (vac): 250
• Solder Tail Contact Plating: Tin
• Termination Post Length (mm [in]): 3.56 [0.140]
• Number Of Positions: 16
• Centerline (mm [in]): 2.54 [0.100]
• Narrow: No
• Post Number(s) Omitted: None
• Solder Tail Contact Material: Copper Alloy
• Contact Type: Pin
• Contact Shape: Square
• Contact Plating, Mating Area, Material: Gold (30) or (30) Total Gold Flash over Palladium Nickel
• Contact Base Material: Copper Alloy
• Connector Style: Plug
• Housing Color: White
• Mating Alignment: Without
• Ul Flammability Rating: UL 94V-0
• Backwall/post Interruption(s): Without
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Applies To: Printed Circuit Board
• Application Use: Wire-to-Board
• Lead Free Status / Rohs Status: Details

Rev H
NOTE
(a)
(b)
Temperature & Termination Resistance Measurement Points
Termination resistance equals millivolts divided by test current less resistance of 2
inches of wire.
After wave soldering, the boards and posts shall be cleaned to remove all flux and
contaminates.
Figure 3
108-1050
6 of 9