LTC1418IG Linear Technology, LTC1418IG Datasheet - Page 26

• Manufacturer Part Number: LTC1418IG
• Description: IC A/D CONV 14BIT SRL&PAR 28SSOP
• Manufacturer: Linear Technology

Specifications of LTC1418IG

• Number Of Bits: 14
• Sampling Rate (per Second): 200k
• Data Interface: Serial, Parallel
• Number Of Converters: 1
• Power Dissipation (max): 21.5mW Unipolar; 31.5mW Bipolar
• Voltage Supply Source: Dual ±
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 28-SSOP (0.200", 5.30mm Width)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

APPLICATIONS
PACKAGE
LTC1418
allows the user to synchronize the A/D conversion to an
external clock either to have precise control of the internal
bit test timing or to provide a precise conversion time. As in
Figure 24, this mode works when the SCLK frequency is
very low (less than 30kHz). However, the external conver-
sion clock must be between 30kHz and 4.5MHz to maintain
26
**
0.005 – 0.009
(0.13 – 0.22)
*
DIMENSIONS DO NOT INCLUDE MOLD FLASH. MOLD FLASH
SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE
DIMENSIONS DO NOT INCLUDE INTERLEAD FLASH. INTERLEAD
FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE
DESCRIPTION
U
INFORMATION
U
0.205 – 0.212**
(5.20 – 5.38)
0.022 – 0.037
(0.55 – 0.95)
W
U
Dimensions in inches (millimeters) unless otherwise noted.
28-Lead Plastic SSOP (0.209)
U
0 – 8
(LTC DWG # 05-08-1640)
G Package
0.0256
(0.65)
BSC
accuracy. If more than 16 SCLKs are provided, more zeros
will be filled in after the data word indefinitely. To select the
external conversion clock tie EXT/INT high. The external
SCLK is applied to SCLK. RD can be used to gate the external
SCLK such that data will clock only after RD goes low.
28
1 2 3 4 5 6 7 8 9 10 11 12
0.010 – 0.015
(0.25 – 0.38)
27
26
25
24
0.397 – 0.407*
(10.07 – 10.33)
23
22 21 20 19 18 17 16 15
13
14
0.002 – 0.008
(0.05 – 0.21)
0.068 – 0.078
(1.73 – 1.99)
0.301 – 0.311
(7.65 – 7.90)
G28 SSOP 0694