AD7998BRUZ-0 Analog Devices Inc, AD7998BRUZ-0 Datasheet - Page 17

• Manufacturer Part Number: AD7998BRUZ-0
• Description: IC ADC 12BIT 8CHAN I2C 20TSSOP
• Manufacturer: Analog Devices Inc

Specifications of AD7998BRUZ-0

• Data Interface: I²C, Serial
• Number Of Bits: 12
• Sampling Rate (per Second): 188k
• Number Of Converters: 1
• Power Dissipation (max): 2.2mW
• Voltage Supply Source: Single Supply
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 20-TSSOP (0.173", 4.40mm Width)
• Resolution (bits): 12bit
• Sampling Rate: 188kSPS
• Input Channel Type: Single Ended
• Supply Voltage Range - Analog: 2.7V To 5.5V
• Supply Current: 1.4mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: EVAL-AD7998CBZ - BOARD EVALUATION FOR AD7998CBZ
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

For ac applications, removing high frequency components from
the analog input signal is recommended, by using an RC band-
pass filter on the relevant analog input pin. In applications where
harmonic distortion and signal-to-noise ratio are critical, the
analog input should be driven from a low impedance source.
Large source impedances significantly affect the ac performance
of the ADC. This may necessitate the use of an input buffer
amplifier. The choice of the op amp is a function of the particular
application.
When no amplifier is used to drive the analog input, the source
impedance should be limited to low values. The maximum source
impedance depends on the amount of total harmonic distortion
(THD) that can be tolerated. THD increases as the source imped-
ance increases, and performance degrades. Figure 23 shows the
THD vs. the analog input signal frequency when using supply
voltages of 3 V ± 10% and 5 V ± 10%. Figure 24 shows the THD
vs. the analog input signal frequency for different source
impedances.
Rev. 0 | Page 17 of 32
–100
–60
–100
–40
–50
–70
–80
–90
–60
–40
–50
–70
–80
–90
10
10
Figure 23. THD vs. Analog Input Frequency for Various
Figure 24. THD vs. Analog Input Frequency for Various
Source Impedances for V
V
DD
= 2.7V
Supply Voltages, F
INPUT FREQUENCY (kHz)
INPUT FREQUENCY (kHz)
V
V
DD
100
DD
100
S
DD
= 5V
= 136 kSPS, Mode 1
= 4.5V
R
R
= 5 V, 136 kSPS, Mode 1
IN
V
IN
DD
R
= 1000 Ω
= 100 Ω
IN
= 3V
= 10 Ω
AD7997/AD7998
V
DD
V
DD
= 3.3V
= 5.5V
R
IN
V
= 50 Ω
DD
= 5V
1000
1000