6450128-2 TE Connectivity, 6450128-2 Datasheet - Page 2

• Manufacturer Part Number: 6450128-2
• Description: MBXL R/A HDR STR 2P+24S+2P
• Manufacturer: TE Connectivity

Specifications of 6450128-2

• Product Series: XL
• Connector Type: Header
• Mount Angle: Right Angle
• Termination Style: Solder
• Mating Type: Squeeze-to-Release
• Pcb Mount Retention: With
• Guides: With
• Voltage Rating (signal) (vac): 60
• Voltage Rating (power) (vdc): 200
• Termination Post Length (mm [in]): 3.43 [0.135]
• Sequencing: No
• Pcb Mount Retention Type: Retention Clip/Post
• Connector Configuration Orientation: Left-to-Right
• Centerline, Dc Module (mm [in]): 6.35 [0.250]
• Centerline, Matrix (mm [in]): 2.54 x 2.54 [.100 x .100]
• Contact Type: Pin
• Contact Material (power): High Conductivity Copper
• Contact Material (signal): Copper Alloy
• Contact Plating, Mating Area, Material: Gold (30)
• Connector Style: Plug
• Housing Material: High Temperature Thermoplastic
• Total Number Of Dc Power: 4
• Total Number Of Signal: 24
• Connector Contact Configuration (no. Of Pos./type): 2/DC Power, 24/Signal, 2/DC Power
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Wave solder capable to 240°C, Wave solder capable to 260°C, Wave solder capable to 265°C
• Rohs/elv Compliance History: Always was RoHS compliant
• Application Use: Cable-to-Board

3.2.
3.3.
3.4.
Rev C
Signal Contact
Single
Materials
Materials used in the construction of this product shall be as specified on the applicable product
drawing.
Ratings
!
!
!
Contact
Performance and Test Description
Product is designed to meet the electrical, mechanical and environmental performance requirements
specified in Figure 3. Unless otherwise specified, all tests shall be performed at ambient environmental
conditions per EIA-364.
4
Power
Power
Power
Signal
Type
NOTE
NOTE
Signal Contacts
Voltage: See Figure 1
Current: See Figure 2
Temperature:
.100 inch [2.54 mm]
.200 inch [5.08 mm]
.250 inch [6.35 mm]
.300 inch [7.62 mm]
Signal Contacts
Denotes Safety Extra Low Voltage (SELV) circuits.
A test system consists of 8 adjacent power contacts on .250 inch [6.35 mm] contact pitch or 4
adjacent power contacts on a .300 inch [7.62 mm] contact pitch. Connectors are applied to
test boards with 2, 4 ounce thick copper power planes.
24 Adjacent
Contact Pitch
1.5
-20 to 105° C
.300 inch [7.62 mm]
.250 inch [6.35 mm]
Primary Circuits
Module (Power
60 (see Note)
Contact Pitch)
Within
Current Per Contact (amperes)
200
300
NR
Volts RMS or DC
Figure 1
Figure 2
Secondary Circuits
Power Contact
60 (see Note)
Primary to
Single
55
55
150
NR
NR
Power Contacts
Power Contacts
Two Adjacent
Ground Circuits
-----
60 (see Note)
50
Primary to
200
300
NR
Power Contacts
Four Adjacent
47
42
Secondary Circuits
60 (see Note)
60 (see Note)
Within
200
300
Power Contacts
Eight Adjacent
108-1973
-----
35
2 of 7