RD4247MAG3110 Freescale Semiconductor, RD4247MAG3110 Datasheet - Page 6

• Manufacturer Part Number: RD4247MAG3110
• Description: DEV KIT MAG3110 LFSTBUSB
• Manufacturer: Freescale Semiconductor
• Series: -r

Specifications of RD4247MAG3110

• Sensor Type: Accelerometer, 3 Axis
• Sensing Range: ±10g
• Interface: I²C
• Sensitivity: 1mg/bit
• Voltage - Supply: 1.95 V ~ 3.6 V
• Embedded: No
• Utilized Ic / Part: MAG3110
• Features: LFSTBUSB For Communication To PC, MAG3110FC & MMA8451Q For System Calibration
• Peak Reflow Compatible (260 C): Yes
• Rohs Compliant: Yes
• Application Sub Type: Magnetic Sensor
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Getting Started
2.3
6
1. Ensure that the compass boards are connected to a USB port on your PC with the USB cable.
2. Launch the toolbox software by doing either of the following:
3. Open the tilt-compensated eCompass application by clicking on Full System Evaluation.
The evaluation board’s red power LED illuminates. (If the LED does not illuminate, check the
power switch located next to the board’s USB connector.)
— Double-click on the application’s desktop icon
— Select Start > Programs > Sensor Toolbox > Sensor Toolbox
Then the MAG3110 evaluation software’s main menu, shown in the following figure, displays.
Launching the Sensor Toolbox Software
The sensor toolbox’s hardware-detection dialog box, shown below, displays.
RD4247MAG3110 Sensor Toolbox Tilt-Compensated eCompass Kit User’s Guide, Rev. 2
Freescale Semiconductor