MAX5308EUE+ Maxim Integrated Products, MAX5308EUE+ Datasheet - Page 10

• Manufacturer Part Number: MAX5308EUE+
• Description: IC DAC 10BIT OCT LP SER 16-TSSOP
• Manufacturer: Maxim Integrated Products

Specifications of MAX5308EUE+

• Settling Time: 5µs
• Number Of Bits: 10
• Data Interface: Serial
• Number Of Converters: 8
• Voltage Supply Source: Single Supply
• Power Dissipation (max): 775mW
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 16-TSSOP
• Resolution: 12 bit
• Interface Type: Serial (SPI)
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.7 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Supply Current: 1.7 mA
• Voltage Reference: External
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

The MAX5308/MAX5309 include three software-con-
trolled shutdown modes that reduce the supply current
to less than 1µA. In two of the three shutdown modes
(shutdown 2 and 3) the outputs are independently con-
nected to ground through a 1kΩ or 100kΩ (default)
resistor. The third shutdown (shutdown 1) command
leaves the DACs outputs high impedance. Table 2 lists
the three shutdown modes of operation as well as the
power-up command.
Low-Power, Low-Glitch, Octal 10-Bit Voltage-
Output DACs with Serial Interface
Table 2. Serial Interface Power-Up and Shutdown Commands
10
X = Don’t Care
C3
CONTROL BITS
1
1
1
1
______________________________________________________________________________________
C2 C1 C0 DAC
1
1
1
1
1
1
1
1
1
1
1
1
8
DAC
7
DAC
6
Shutdown Modes
DAC
5
DAC
4
DATA BITS
DAC
3
DAC
2
DAC
1
D03 D02 D01 D00 DESC.
The DOUT (MAX5308) follows DIN with a 16 clock
cycle delay. The DOUT is capable of driving 20pF load
with a 50ns (max) delay from the falling edge of SCLK.
DOUT is primarily used for daisy-chaining multiple
devices. Optionally, DOUT can be used to monitor the
serial interface for valid communications by connecting
DOUT to a microprocessor input.
The MAX5309 has an active-low CLR input. Drive CLR
low to clear all internal registers, shutdown all DACs,
1
0
1
0
1
1
0
0
X
X
X
X
X
X
X
X
down 1
down 2
down 3
Power-
Shut-
Shut-
Shut-
Serial-Data Output (DOUT)
Up
Hardware Clear (CLR)
Power-Up individual DAC
buffers indicated by data in
DAC1 through DAC8. A one
indicates the DAC output is
connected and active. A zero
does not affect the DACs
present state.
Shutdown individual DAC
buffers indicated by data in
DAC1 through DAC8. A one
indicates the DAC output is
high-impedance. A zero
does not affect the DACs’
present state.
Shutdown individual DAC
buffers indicated by data in
DAC1 through DAC8. A one
indicates the DAC is shutdown
and the output is connected
to GND through a 1kΩ resistor.
A zero does not affect the
DACs present state.
Shutdown individual DAC
buffers indicated by data in
DAC1 through DAC8. A one
indicates the DAC is shutdown
and the output is connected
to GND through a 100kΩ
resistor. A zero does not affect
the DACs present state.
FUNCTION