2-1926733-5 TE Connectivity, 2-1926733-5 Datasheet - Page 3
![RECEPTACLE CONNECTOR 25 SIGNAL + 10 POWER POSITIONS](/photos/39/86/398611/pr1926733_sml.jpg)
2-1926733-5
Manufacturer Part Number
2-1926733-5
Description
RECEPTACLE CONNECTOR 25 SIGNAL + 10 POWER POSITIONS
Manufacturer
TE Connectivity
Specifications of 2-1926733-5
Rohs Compliant
YES
Pcb Mount Alignment
Without
Pcb Mount Retention
With
Pcb Mounting Orientation
Right Angle
Make First / Break Last
Yes
Product Line
MINIPAK HDL
Ul File Number
E28476
Termination Method To Pc Board
Through Hole - Press Fit
Sealed
No
Number Of Power Positions
10
Operating Voltage Reference
AC
Operating Voltage (vac)
250
Hot Pluggable
No
Tail Length (mm [in])
3.3 [0.13]
Tail Orientation
In-line
Profile Height (y-axis) (mm [in])
8.00 [0.315]
Number Of Signal Positions
25
Number Of Positions
35
Pcb Mount Retention Type
Screw Mount
Selectively Loaded
Yes
Centerline (mm [in])
2.00 [0.079]
Centerline, Power Contacts (mm [in])
2.75 [0.108]
Underplate Material Thickness (µm [?in])
1.27 [50.000]
Length (x-axis) (mm [in])
51.71 [2.040]
Width (z-axis) (mm [in])
36.58 [1.440]
Number Of Rows
1
Mating Retention
Without
Tail Plating Material
Bright Tin-Lead
Contact Type
Socket
Contact Base Material
Copper
Contact Plating, Mating Area, Material
Gold or Palladium Nickel or Performance Based
Contact Plating, Mating Area, Thickness (µm [?in])
0.762 [30]
Tail Plating, Thickness (µm [?in])
0.5 [20]
Underplate Material
Nickel
Contact Design
Single Beam
Connector Style
Receptacle
Mating Alignment
With
Housing Material
Crystal Polymer
Ul Flammability Rating
UL 94V-0
Housing Color
Black
Mating Alignment Type
Passive Guide
Connector Contact Configuration (no. Of Pos./type)
25/Signal, 10/AC Power
Custom Configurable
No
Rohs/elv Compliance
RoHS compliant, ELV compliant
Lead Free Solder Processes
Not relevant for lead free process
Rohs/elv Compliance History
Always was RoHS compliant
Agency/standard
UL, CSA
Ul Rating
Recognized
Ul Voltage Rating (vac)
250
Csa Certified
Yes
Operating Temperature (°c [°f])
-40 – +125 [-40 – +257]
Pcb Thickness, Recommended (mm [in])
1.40 [0.055]
Applies To
Printed Circuit Board
Board-to-board Configuration
Co-Planar
Contact Transmits (typical Application)
Signal (Data)/ Power
Application Use
Board-to-Board
Pick And Place Cover
Without
Packaging Method
Tray
Lead Free Status / Rohs Status
Details
|
|
3.5.
Initial exam ination of product.
Final examination of product.
Low Level Contact Resistance
(LLCR), signal and power contacts.
Contact resistance at rated current,
power contacts.
Insulation resistance.
W ithstanding voltage.
Rev B
Test Requirem ents and Procedures Sum m ary
Test Description
Meets requirem ents of product
drawing.
Meets visual requirem ents.
Power contacts:
5 m illiohm s m axim um initial.
5 m illiohm s m axim um change.
Signal contacts:
20 m illiohm s m axim um initial.
10 m illiohm s m axim um change.
1.6 m illiohm s average of the
m axim um values, end of life.
1000 m egohm s m inim um for both
signal and power contacts.
One m inute hold with no breakdown
or flashover.
Figure 3 (continued)
ELECTRICAL
Requirem ent
EIA-364-18.
Visual and dim ensional (C of C)
inspection per product drawing.
Docum ent gold plating thickness at
contact interfaces.
EIA-364-18.
Visual inspection.
EIA-364-23.
Subject specim ens to 100
m illiam peres m axim um and 20
m illivolts m axim um open circuit
voltage.
EIA-364-6.
Measure m illivolt drop at
17 am peres at 30 C tem perature
rise end of life for 2.75 m m
centerline, 8 contacts energized.
See Figure 2.
EIA-364-21.
100 volts DC, 2 m inute hold for
signal contacts.
500 volts DC, 2 m inute hold for
power contacts.
Test between adjacent contacts of
m ated specim ens.
EIA-364-20, Condition I.
750 volts DC at sea level for signal
contacts.
2500 volts DC for power contacts.
Test between adjacent contacts of
m ated specim ens and between
closest signal and power contacts.
Procedure
108-2325
3 of 9