N010-0554-T813 Fujitsu Components, N010-0554-T813 Datasheet - Page 6
![no-image](/images/manufacturer_photos/0/2/268/fujitsu_components_sml.jpg)
N010-0554-T813
Manufacturer Part Number
N010-0554-T813
Description
Manufacturer
Fujitsu Components
Datasheet
1.N010-0554-T813.pdf
(7 pages)
Specifications of N010-0554-T813
Operating Temperature Classification
Commercial
Lead Free Status / Rohs Status
Compliant
Location
1.
2.
3.
4.
(Drawing) with conductive connector and glass
side down. See page 1 for detail of connector exit
side which is left.
n 9.0 CONNECTION AND MOUNTING
The details below indicate the recommended mounting structure for panel and enclosure. The enclosure sup-
port to fix the touch panel must be over 1.0mm I width and must be outside the view (Transparent area). Also
ensure that the enclosure does not cause miss input by touching the view area.
The following diagram shows that the enclosure edge must be between the View area and the guaranteed ac-
tive area. Ensure space is allocated for the diodes, and we recommend that the material to fix the panel and
enclosure is elastic. Special design would be required to stop water ingress. The corners of the touch panel
are conductive so do not touch any metal parts after mounting.
1.0 to 3.0 mm
Detect
Bottom
Left
Top
Right
Shock absorber to protect
the panel (eg rubber)
View Area
5.1
Transparent Area
Stiffener board 10.2
Input Area
Input Panel
Anti-input Area
Circuit Board
LCD
(Mating connector type FCI or equivalent
SFW4R-1STAE1-LF: for FPC)
0.8 mm min.
Upper Case
Wiring Area
Connector
Top View (Picture, with conductive
side down)
554 SERIES
Shock absorber
for protection
6