PLRXPL-SC-S43-22-N JDS UNIPHASE, PLRXPL-SC-S43-22-N Datasheet - Page 17

• Manufacturer Part Number: PLRXPL-SC-S43-22-N
• Manufacturer: JDS UNIPHASE

Specifications of PLRXPL-SC-S43-22-N

• Optical Fiber Type: TX/RX
• Data Transfer Rate: 10520Mbps
• Optical Rise Time: 0.028ns
• Optical Fall Time: 0.028ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 850nm
• Package Type: SFP
• Operating Supply Voltage (min): 3.14V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.47V
• Operating Temp Range: 0C to 70C
• Mounting: Panel
• Pin Count: 20
• Lead Free Status / Rohs Status: Compliant

Data Field Descriptions
17
127
255
95
0
Address( 1010000X)(A0h)
JDSU-Specific Information
Serial ID Information;
Defined by SFP MSA
Reserved for SFP MSA
Reading the data
The information is accessed through the SCL and SDA connector pins of the mod-
ule. The SFF-8431 Revision 3.2 specification contains all the timing and address-
ing information required for accessing the data in the EEPROM.
The device address used to read the Serial ID data is 1010000X(A0h), and the ad-
dress to read the diagnostic data is 1010001X(A2h). Any other device addresses
will be ignored.
MOD_ABS, pin 6 on the transceiver, is connected to Logic 0 (Ground) on the
transceiver.
SCL, pin 5 on the transceiver, is connected to the SCL pin of the EEPROM.
SDA, pin 4 on the transceiver, is connected to the SDA pin of the EEPROM.
The EEPROM Write Protect pin is internally tied to ground with no external access,
allowing write access to the customer-writable field (bytes 128 – 247 of address
1010001X). Note: address bytes 0 – 127 are not write protected and may cause
diagnostic malfunctions if written over.
Decoding the data
The information stored in the EEPROM, including the organization and the digital
diagnostic information, is defined in the Small Form Factor Committee document
SFF-8472 Revision 10.3, dated December 1, 2007.
10 G SFP+ 850 NM LIMITING TRANSCEIVER,
10 GIGABIT ETHERNET COMPLIANT
119
127
247
255
55
95
0
Address( 1010001X)(A2h)
Alarm and Warning Limits
JDSU-Specific Information
JDSU-Specific Information
writeable, field-writeable
Real Time Diagnostic
Reserved for External
Calibration Constants
Nonvolatile, customer-
Information
area