LQ121S1DG31 Sharp Electronics, LQ121S1DG31 Datasheet - Page 15

• Manufacturer Part Number: LQ121S1DG31
• Manufacturer: Sharp Electronics

Specifications of LQ121S1DG31

• Lead Free Status / Rohs Status: Not Compliant

10. Display Quality
11．Handling Precautions
12. Packing form
Inspection Standard.
a) Be sure to turn off the power supply when inserting or disconnecting the cable.
b) Be sure to design the cabinet so that the module can be installed without any extra stress such as
c)Since the front polarizer is easily damaged, pay attention to avoid rubbing with something hard
d) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
e) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
f) Since the panel is made of glass and refined wires and components, it may break,crack or internal
g) Since CMOS LSI is used in this module, take care of static electricity and injure the human earth
h) Observe all other precautionary requirements in handling components.
i) This module has its circuitry PCBs on the rear side and should be carefully handled in order not
j) The polarizer surface on the panel is treated with Anti-Glare for low reflection. In case of attaching
k) Connect GND to 4 place of mounting holes to stabilize against EMI and external noise.
l) There are high voltage portions on the backlight and very dangerous. Careless touch may lead
a) Piling number of cartons : MAX.: 8
b) Package quantity in one carton : 10 pcs
c) Carton size : 359 mm(W)×266 mm(H)×292 mm(D)
d) Total mass of 1 carton filled with full modules : 9.1 (kg)
The display quality of the color TFT-LCD module shall be in compliance with the Incoming
warp or twist.
while inserting the connector.
or sharp.
wire breaking if dropped or bumped on hard surface.
Handle with care.
when handling.
to be stressed.
protective board over the LCD. Be careful about the optical interference fringe etc.
Which degrades display quality.
to electrical shock. When exchange lamps or service. Turn off the power without tail.
To avoid excessive stress on the circuit board, press the surface of the metal case of LCD module,
LD-12204-13