M38510/76302BEA QP SEMICONDUCTOR, M38510/76302BEA Datasheet - Page 4

• Manufacturer Part Number: M38510/76302BEA
• Manufacturer: QP SEMICONDUCTOR

Specifications of M38510/76302BEA

• Lead Free Status / Rohs Status: Supplier Unconfirmed

extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the solicitation or
contract.
the Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)
the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations
unless a specific exemption has been obtained.
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturers list before contract
award (see 4.3 and 6.4).
herein or as modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall not
affect the form, fit, or function as described herein.
specified in MIL-PRF-38535 and herein.
figures 1 and 2.
qualifying activity and the preparing activity (DSCC-VAS) upon request.
2.2 Government documents.
2.2.1 Specifications and Standards. The following specifications and standards form a part of this specification to the
DEPARTMENT OF DEFENSE SPECIFICATIONS
DEPARTMENT OF DEFENSE STANDARDS
2.3 Order of precedence. In the event of a conflict between the text of this specification and the references cited herein,
3. REQUIREMENTS
3.1 Qualification. Microcircuits furnished under this specification shall be products that are manufactured by a
3.2 Item requirements. The individual item requirements shall be in accordance with MIL-PRF-38535 and as specified
3.3 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as
3.3.1 Terminal connections and logic diagrams. The terminal connections and logic diagrams shall be as specified on
3.3.2 Truth tables. The truth tables and logic equations shall be as specified on figure 3.
3.3.4 Schematic circuits. The schematic circuits shall be maintained by the manufacturer and made available to the
3.3.5 Case outlines. The case outlines shall be as specified in 1.2.3.
3.4 Lead material and finish. The lead material and finish shall be in accordance with MIL-PRF-38535 (see 6.6).
(Copies of these documents are available online at
MIL-PRF-38535 -
MIL-STD-883
MIL-STD-1835
-
-
Integrated Circuits (Microcircuits) Manufacturing, General Specification for.
Test Method Standard for Microelectronics.
Interface Standard Electronic Component Case Outlines
MIL-M-38510/315D
http://assist.daps.dla.mil;quicksearch/
4
or
www.dodssp.daps.mil
or from