ST7265XEVALMS STMicroelectronics, ST7265XEVALMS Datasheet - Page 4

• Manufacturer Part Number: ST7265XEVALMS
• Manufacturer: STMicroelectronics

Specifications of ST7265XEVALMS

• Lead Free Status / Rohs Status: Supplier Unconfirmed

ST7265x
1 INTRODUCTION
The ST7265x MCU supports volume data ex-
change with a host (computer or kiosk) via a full
speed USB interface. The MCU is capable of han-
dling various transfer protocols, with a particular
emphasis on mass storage applications.
ST7265x is compliant with the USB Mass Storage
Class specifications, and supports related proto-
cols such as BOT (Bulk Only Transfer) and CBI
(Control, Bulk, Interrupt).
It is based on the ST7 standard 8-bit core, with
specific peripherals for managing USB full speed
data transfer between the host and most types of
FLASH media card:
– A full speed USB interface with Serial Interface
– A dedicated 24 MHz Data Buffer Manager state
Figure 1. USB Data Transfer Block Diagram
4/163
1
Engine, and on-chip 3.3V regulator and trans-
ceivers.
machine for handling 512-byte data blocks (this
ST7 CORE
BUFFER ACCESS
COPROCESSOR
ARBITRATION
TRANSFER
TRANSFER
SHIFTERS
STORAGE
USB DATA
DEVICE
LEVEL
MASS
DATA
(DTC)
USB
SIE
– A Data Transfer Coprocessor (DTC), able to
– An Arbitration block gives the ST7 core priority
– A FLASH Supply Block able to provide program-
Related Documentation
AN1475: Developing an ST7265x Mass Storage
Application
size corresponds to a sector both on computers
and FLASH media cards).
handle fast data transfer with external devices.
This DTC also computes the CRC or ECC re-
quired to handle Mass storage media.
over the USB and DTC when accessing the Data
Buffer. In USB mode, the USB interface is serv-
iced before the DTC.
mable supply voltage and I/O electrical levels to
the FLASH media.
DATA TRANSFER
512-byte RAM
512-byte RAM
BUFFER
Buffer
Buffer