BOXD845EBG2L Intel, BOXD845EBG2L Datasheet - Page 53
BOXD845EBG2L
Manufacturer Part Number
BOXD845EBG2L
Description
Manufacturer
Intel
Datasheet
1.BOXD845EBG2L.pdf
(128 pages)
Specifications of BOXD845EBG2L
Lead Free Status / Rohs Status
Supplier Unconfirmed
- Current page: 53 of 128
- Download datasheet (756Kb)
2.8 Connectors
✏
CAUTION
Only the back panel USB, front panel USB, VGA, and PS/2 connectors of the Desktop Boards
D845EBG2 and D845EPT2 have overcurrent protection. The Desktop Boards’ internal
connectors are not overcurrent protected and should connect only to devices inside the computer’s
chassis, such as fans and internal peripherals. Do not use these connectors to power devices
external to the computer’s chassis. A fault in the load presented by the external devices could
cause damage to the computer, the interconnecting cable, and the external devices themselves.
This section describes the Desktop Board’s connectors. The connectors can be divided into these
groups:
•
•
•
NOTE
When installing the Desktop Board in a microATX chassis, make sure that peripheral devices are
installed at least 1.5 inches above the main power connector, the diskette drive connector, the IDE
connector, and the DIMM sockets.
Back panel I/O connectors (see page 54)
PS/2 keyboard and mouse
USB (four)
Parallel port
Serial port A
LAN (optional)
Audio (optional: line out, line in, and mic in)
Internal I/O connectors (see page 57)
Audio (auxiliary line input and ATAPI CD-ROM)
Fans
Power
Add-in boards (PCI and AGP)
CNR (optional)
IDE
Diskette drive
SCSI LED
External I/O connectors (see page 70)
Front panel audio
Front panel USB
Serial port B
Auxiliary front panel power/sleep/message-waiting LED
Front panel (power/sleep/message-waiting LED, power switch, hard drive activity LED,
reset switch, and auxiliary front panel power LED)
Technical Reference
53