NL128102AC31-02 NEC Electronics, NL128102AC31-02 Datasheet - Page 23

• Manufacturer Part Number: NL128102AC31-02
• Manufacturer: NEC Electronics

Specifications of NL128102AC31-02

• Lead Free Status / Rohs Status: Not Compliant

3.11 CONTROL FUNCTIONS
No.
10
11
12
13
3.11.1 Control function items
Note1: The memorized values are not affected even if the LCD module's power is off. But the selected
Note2: The auto adjustment value may not become an optimal value for the best picture quality by
Note3: Auto adjustment function should be executed under following condition. Otherwise, the display
Note4: A screen may be distorted only a moment when each adjustment value is changed.
Note5: As for the input signal information, when a signal except the presetting timing is input, the
1
2
3
4
5
6
7
8
9
In order to achieve the best picture quality, the follow functions should be adjusted by setting SEL ( [S] ),
UP([ ]), DOWN([ ]), LEFT([ ]), RIGHT([ ]), RESET([R]) and EXIT([E]) signals. Adjustment values
are memorized every display modes.
Brightness
Contrast
Color
Gamma
Auto gain control
Position
Size
Clock
Auto adjust
OSD position
Language
All Reset
Information
value is not memorized, in case that a selected mode is changed to another one or the power is off
during adjusting.
customer equipment and display screens. And the auto adjustment function does not act normally
when both Sync On Green signal and separate synchronous signals are input, in those cases, adjust
each function (position, size and clock) manually.
quality after auto adjustment executing may be distorted.
resolution which is different from the input signal may display.
x In R, G or B, equal to or more than 1 color must be displayed. (It should be more than half
y The dot in the screen 4 corner must be displayed.
Item
tone.)
W, R, G, B
W
W, R, G, B
W
W, R, G, B
W
H. Position
V. Position
H. Size
Clock Phase
valid
valid
valid
valid
invalid
invalid
invalid
invalid
invalid
valid
valid
valid
valid
signal input
At digital
Brightness of backlight control
White-level of video signals synchronous color and each color control
White-level of video signal synchronous color control
Color level of video signals synchronous color and each color control
Color level of video signal synchronous color control
Gamma of video signals synchronous color and each color control
Gamma of video signal synchronous color control
According to the amplitude of the input signal, the gain can be automatically
adjusted.
Horizontal position adjustment
Vertical position adjustment
Horizontal display period adjustment
Clock phase adjustment
Position, size and clock can be automatically adjusted.
OSD position adjustment
The display position of OSD can be moved.
The display language of OSD can choose from English, German, French and
Spanish.
Reset to initial value
The values in No.1 to No.8, No.10 and No.11 are returned to the initial
values.
Video signal information
Display resolution, HS frequency and VS frequency
Data Sheet EN0545EJ1V0DS
Function
NL128102AC31-02A
23