1-917484-5 TE Connectivity, 1-917484-5 Datasheet - Page 11

• Manufacturer Part Number: 1-917484-5
• Description: DYNAMIC D-3 REC CONT. 2L 16-14
• Manufacturer: TE Connectivity
• Series: D3 Seriesr

Specifications of 1-917484-5

• Product Type: Contacts
• Contact Gender: Socket (Female)
• Mounting Style: Wire
• Termination Style: Crimp
• Wire Gauge Range: 16-14
• Contact Material: Copper Alloy
• Wire Size (awg): 16-14
• Product Series: D-3
• Insulation Diameter (mm [in]): 2.20-2.80 [.086-.110]
• Insertion Force: High
• Termination End Plating: Tin
• Wire Range (mm [awg]): 1.25-2.00² [16-14]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Tin
• Contact Base Material: Copper Alloy
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Wire Range Mark: 2L
• Applies To: Wire/Cable
• Packaging Quantity: 3,000
• Packaging Method: Reel
• Lead Free Status / Rohs Status: Details

４．品質保証条項
Rev. J5
4.1 製品認定試験
4.2 製品再認定試験
Ｃ．試験条件
Ａ．試料の選定
Ｂ．試験順序
もし製品に、形状、組合せや嵌合、又は機能に
相当の影響を及ぼす変更がなされた時には、品
質
保証部門は、製品開発、品質保証、信頼性技術
部門により決定された初期の試験項目全部又は
その一部による製品再認定試験の実施を設定す
ること。
もとで性能試験を行うものとする。
コネクタとコンタクトは該当する取扱説明書
に従って作成準備されること。試料は現行の生
産システムから無作為抽出で選定されること。
品質確認検査はFig.6に示す順序で試験を実施
し、性能要件を確かめること。
特に指定のない場合は、下記に示す環境条件の
気 圧／Atmospheric Pressure
相対湿度／Relative humidity
温 度／Temperature
Product Specification
製品規格
４．QUALITY ASSURANCE ROVISIONS:
4.1 Qualification Testing：
８６６.６～１０６６.６hPa
4.2
Ａ．Sample Selection：
Ｂ．Test Sequence：
Ｃ．Test Conditions：
If changes sighificantly affecting from､fit,or
function are made to the product or to the
manufacturing process,product assurance shall
coordinate requalification testing,consisting
of all or part of the original testing sequence
as determined by envelopment product,quality,
and reliability engineering.
Connector housings and contacts shall be
prepared in accordance with applicable
Instruction Sheets. They shall be selected
at random from current production.
Qualification inspection shall be verified by
Testing samples as specified in Figure 6.
Unless otherwise specified,all the tests
shall be performed in any conbination of the
test condition.
Requalification Testing
１５～３５℃
４５～７５％
108-5349
11 of 12