MAX5735BUTN+T Maxim Integrated Products, MAX5735BUTN+T Datasheet - Page 18

• Manufacturer Part Number: MAX5735BUTN+T
• Description: IC DAC 16BIT 32CHAN SER 56-TQFN
• Manufacturer: Maxim Integrated Products

Specifications of MAX5735BUTN+T

• Settling Time: 20µs
• Number Of Bits: 16
• Data Interface: MICROWIRE™, QSPI™, Serial, SPI™
• Number Of Converters: 32
• Voltage Supply Source: Analog and Digital
• Power Dissipation (max): 2.5W
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 56-TQFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

32-Channel, 16-Bit, Voltage-Output
DACs with Serial Interface
C2, C1, and C0 = 010, address bits A5–A0 = 111111,
and all data bits to don’t care. See Table 3 for the data
format. This operation updates all DAC outputs.
Note: The software load DAC does not affect the offset DAC.
The MAX5732–MAX5735 feature an active-low CLR
logic input that sets all channels including the offset
DAC to 0V (code 0000hex). The offset DAC needs to be
reprogrammed after CLR is asserted. Driving CLR low
clears the contents of both the input and DAC registers.
The serial interface can also issue a software clear com-
mand. Setting the control bits C2, C1, and C0 = 111
(Table 4) performs the same function as driving logic-
input CLR low. Table 4 shows the clear-data format for
the software-controlled clear command. This register-
reset process cannot be interrupted. All serial input data
is ignored until the entire reset process is complete.
Table 3. Load-DAC Data Format
Table 4. Clear-Data Format
Table 5. Serial-Data Format
18
MSB
CONTROL
CONTROL
CONTROL
AND C0
AND C0
C2, C1,
C2, C1,
C2, C1,
and C0
BITS
BITS
BITS
010
111
______________________________________________________________________________________
ADDRESS
ADDRESS
See table 7
ADDRESS
111111
A5–A0
A5–A0
A5–A0
BITS
BITS
BITS
XXXXXXX
XXXXXXX
XXXXXXX
DON’T-
DON’T-
DON’T-
CARE
CARE
CARE
BITS
BITS
BITS
—
—
XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX
DATA BITS
DATA BITS
DATA BITS
Clear ( CLR )
D15–D0
D15–D0
D15–D0
LSB
A 3-wire SPI-/QSPI-/MICROWIRE- and DSP-compatible
serial interface controls the MAX5732–MAX5735. The
interface requires a 32-bit command word to control the
device. The command word consists of 3 control bits, 6
address bits, 7 don’t-care bits, and 16 data bits. Table 5
shows the general serial-data format. The control bits
control various write and read commands as well as the
load DAC and clear commands. Table 6 shows the con-
trol-bit functions. The address bits select the register(s)
to be written. Table 7 shows the address functions. The
data bits control the value of the DAC outputs.
Table 6. Control-Bit Functions
C2 C1 C0
CONTROL
0
0
0
0
1
1
1
1
BITS
0
0
1
1
0
0
1
1
0
1
0
1
0
1
0
1
No operation (NOP); no internal registers
change state. The NOP command can be
passed to DOUT depending on the state of the
configuration register. Address bits A5–A0 and
data bits D15–D0 are ignored.
Loads D15–D0 into the input register(s) for the
selected address. Depending on the address
bits, this command could write to:
Loads DAC register(s) from the input register(s).
Depending on the address bits, this command
can update one or all of the DAC registers from
the stored input register value(s). Data bits
D15–D0 are ignored.
Write-through; loads D15–D0 into the input and
DAC registers, depending on the address bits.
Read command; depending on the address bits,
one of the DAC-register values or the
configuration-register value may be read back
through DOUT. Data bits D15–D0 are ignored.
Reserved for internal testing; do not use.
Reserved for internal testing; do not use.
C l ear r eg i ster ( s) ; d ep end i ng on the ad d r ess b i ts,
one or al l r eg i ster s ( excep t the offset- D AC r eg i ster s)
ar e cl ear ed to zer o. D ata b i ts D 15–D 0 ar e i g nor ed .
The configuration register (A[5:0] = 100001)
One of the i np ut r eg i ster s of the 32 D AC channel s
All 32 DAC input registers (A[5:0] = 111111)
The offset D AC i np ut r eg i ster ( A[ 5:0] = 100000)
CONTROL-BIT DESCRIPTION
Serial Interface