MAX5733AUTN+ Maxim Integrated Products, MAX5733AUTN+ Datasheet

IC DAC 16BIT 32CHAN SER 56-TQFN

MAX5733AUTN+

Manufacturer Part Number
MAX5733AUTN+
Description
IC DAC 16BIT 32CHAN SER 56-TQFN
Manufacturer
Maxim Integrated Products
Datasheet
1.MAX5732BUTNT.pdf (28 pages)

Specifications of MAX5733AUTN+

Settling Time
20µs
Number Of Bits
16
Data Interface
MICROWIRE™, QSPI™, Serial, SPI™
Number Of Converters
32
Voltage Supply Source
Analog and Digital
Power Dissipation (max)
2.5W
Operating Temperature
0°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
56-TQFN
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
The MAX5732–MAX5735 are 32-channel, 16-bit, voltage-
output, digital-to-analog converters (DACs). All devices
accept a 3V external reference input. The devices
include an internal offset DAC that allows all the outputs
to be offset and a ground-sensing function, allowing out-
put voltages to be referenced to a remote ground.
A 33MHz SPI™-/QSPI™-/MICROWIRE™- and digital
signal processor (DSP)-compatible serial interface con-
trols the MAX5732–MAX5735. Each DAC has a double-
buffered input structure that helps minimize the digital
noise feedthrough from the digital inputs to the outputs,
and allows for synchronous or asynchronous updating
of the outputs. The MAX5732–MAX5735 also provide a
DOUT that allows for read-back or daisy chaining multi-
ple devices. The devices provide separate power
inputs for the analog and digital sections and provide
separate power inputs for the output buffer amplifiers.
The MAX5732–MAX5735 include proprietary deglitch
circuits to prevent output glitches at power-up and
eliminate the need for power sequencing. The devices
provide a software-shutdown mode to allow efficient
power management. The MAX5732–MAX5735 con-
sume 50µA of supply current in shutdown.
The MAX5732–MAX5735 provide buffered outputs that
can drive 10kΩ in parallel with 100pF. The MAX5732 has
a 0 to +5V output range; the MAX5733 has a 0 to +10V
range; the MAX5734 has a -2.5V to +7.5V range; the
MAX5735 has a -5V to +5V range. The MAX5732–
MAX5735 are available in a 56-pin, 8mm x 8mm, thin
QFN package and 64-pin TQFP package and operate
over the 0°C to +85°C temperature range.
19-3148; Rev 7; 11/05
SPI/QSPI are trademarks of Motorola, Inc.
MICROWIRE is a trademark of National Semiconductor Corp.
Pin Configurations continued at end of data sheet.
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
Automatic Test Systems
Optical Router Controls
Industrial Process Controls
Arbitrary Function Generators
Avionics Equipment
Digital Offset/Gain Adjustment
________________________________________________________________ Maxim Integrated Products
General Description
32-Channel, 16-Bit, Voltage-Output
Applications
DACs with Serial Interface
♦ Guaranteed Monotonic to 16 Bits
♦ 32 Individual DACs in an 8mm x 8mm, 56-Pin,
♦ Four Output Voltage Ranges
♦ Buffered Voltage Outputs Capable of Driving
♦ Glitch-Free Power-Up
♦ SPI-/QSPI-/MICROWIRE-/DSP-Compatible 33MHz
Note: All devices operate over the 0°C to +85°C temperature
range.
*EP = Exposed pad (internally connected to V
Ordering Information continued at end of data sheet.
MAX5732AUTN
MAX5732BUTN
Thin QFN Package or 64-Pin TQFP Package
10kΩ || 100pF
Serial Interface
0 to +5V (MAX5732)
0 to +10V (MAX5733)
-2.5V to +7.5V (MAX5734)
-5V to +5V (MAX5735)
PART
REFGND
TOP VIEW
OUT20
OUT19
OUT18
OUT17
OUT16
OUT15
OUT14
OUT13
OUT12
OUT11
OUT10
AV
AV
CC
DD
43
44
45
46
47
48
49
50
51
52
53
54
55
56
42
1
VOLTAGE
41
2
OUTPUT
0 to +5
0 to +5
40
3
8mm x 8mm THIN QFN-EP
(V)
39
Ordering Information
4
38
MAX5732–MAX5735
5
EXPOSED PADDLE
Pin Configurations
37
6
36
7
(LSB)
35
MAX
8
±16
INL
±8
34
9
33
10
32
11
PIN-
PACKAGE
56 Thin
QFN-EP*
56 Thin
QFN-EP*
31
12
30
13
SS
29
14
Features
).
28
27
26
25
24
23
22
21
20
19
18
17
16
15
V
AV
REF
REFGND
GS
CLR
LDAC
DGND
DV
DIN
SCLK
DOUT
CS
DSP
SS
DD
DD
PKG
CODE
T5688-3
T5688-3
1

Related parts for MAX5733AUTN+

Image
Part Number
Description
Manufacturer
Datasheet
Request R
MAX7528KCWP
Part Number:
MAX7528KCWP
Description:
MAX7528KCWPMaxim Integrated Products [CMOS Dual 8-Bit Buffered Multiplying DACs]
Manufacturer:
Maxim Integrated Products
Datasheet:
MAX7528KCWP.pdf (12 pages)
MAX3261CCJ
Part Number:
MAX3261CCJ
Description:
Single +5V, fully integrated, 1.25Gbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
MAX3261CCJ.pdf (12 pages)
MAX3263CAG
Part Number:
MAX3263CAG
Description:
Single +5V, fully integrated, 155Mbps laser diode driver.
Manufacturer:
Maxim Integrated Products
Datasheet:
MAX3263CAG.pdf (12 pages)
MAX8809AETL+
Part Number:
MAX8809AETL+
Description:
VRD11/VRD10, K8 Rev F 2/3/4-Phase PWM Controllers with Integrated Dual MOSFET Drivers
Manufacturer:
Maxim Integrated Products
Datasheet:
MAX8809AETL.pdf (50 pages)
MAX1535CETJ+T
Part Number:
MAX1535CETJ+T
Description:
Highly Integrated Level 2 SMBus Battery Chargers
Manufacturer:
Maxim Integrated Products
Datasheet:
MAX1535CETJT.pdf (39 pages)
DS2741N+
Part Number:
DS2741N+
Description:
Current Monitor and Accumulator with Integrated Sense Resistor; ; Temperature Range: -40°C to +85°C
Manufacturer:
Maxim Integrated Products
MAX13450EAUD+T
Part Number:
MAX13450EAUD+T
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
MAX13451EAUD+T
Part Number:
MAX13451EAUD+T
Description:
TSSOP 14/A°/RS-485 Transceivers with Integrated 100O/120O Termination Resis
Manufacturer:
Maxim Integrated Products
MAX17497BATE+
Part Number:
MAX17497BATE+
Description:
QFN 16/A°/AC-DC and DC-DC Peak-Current-Mode Converters with Integrated Step
Manufacturer:
Maxim Integrated Products
MAX17502FATB+T
Part Number:
MAX17502FATB+T
Description:
TDFN/A/65V, 1A, 600KHZ, SYNCHRONOUS STEP-DOWN REGULATOR WITH INTEGRATED SWI
Manufacturer:
Maxim Integrated Products
MAX1978EVKIT
Part Number:
MAX1978EVKIT
Description:
Integrated Temperature Controller f
Manufacturer:
Maxim Integrated Products
MAX2606EUT+
Part Number:
MAX2606EUT+
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
MAX2608EUT+
Part Number:
MAX2608EUT+
Description:
SOT23-6/I°/45MHz to 650MHz, Integrated IF VCOs with Differential Output
Manufacturer:
Maxim Integrated Products
MAX2831EVKIT+
Part Number:
MAX2831EVKIT+
Description:
EVALUATION KIT/2.4GHZ TO 2.5GHZ 802.11G/B RF TRANSCEIVER WITH INTEGRATED PA
Manufacturer:
Maxim Integrated Products
MAX4888CETI+
Part Number:
MAX4888CETI+
Description:
QFN/E/DUAL PCIE/SATA HIGH SPEED SWITCH WITH INTEGRATED BIAS RESISTOR
Manufacturer:
Maxim Integrated Products
Datasheet:
MAX4888BETI.pdf (10 pages)

MAX5733AUTN+ Summary of contents

Page 1

... SPI/QSPI are trademarks of Motorola, Inc. MICROWIRE is a trademark of National Semiconductor Corp. Pin Configurations continued at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. DACs with Serial Interface ♦ ...

Page 2

Voltage-Output DACs with Serial Interface ABSOLUTE MAXIMUM RATINGS AGND, DGND, REFGND ..................-0.3V to +12V AGND, DGND................................................-6V to +0. AGND, DGND, REFGND.................-0. ...

Page 3

Voltage-Output ELECTRICAL CHARACTERISTICS—MAX5732 (0 to +5V Output Voltage Range) (continued) (AV = +5.25V to +5.5V (Note 1 ∞, C +3.0V 50pF referenced to ground PARAMETER SYMBOL Capacitive Load to ...

Page 4

Voltage-Output DACs with Serial Interface ELECTRICAL CHARACTERISTICS—MAX5733 (0 to +10V Output Voltage Range) (AV = +10.5V to +11V ±5 ∞ 50pF referenced to ground PARAMETER ...

Page 5

Voltage-Output ELECTRICAL CHARACTERISTICS—MAX5733 (0 to +10V Output Voltage Range) (continued) (AV = +10.5V to +11V ±5 ∞ 50pF referenced to ground PARAMETER SYMBOL DIGITAL INPUTS ...

Page 6

Voltage-Output DACs with Serial Interface ELECTRICAL CHARACTERISTICS—MAX5734 (-2.5V to +7.5V Output Voltage Range) (AV = +7.75V to +8.25V +5V ±5 program the offset DAC to 4000hex. V REF noted. Typical values are at ...

Page 7

Voltage-Output ELECTRICAL CHARACTERISTICS—MAX5734 (-2.5V to +7.5V Output Voltage Range) (continued) (AV = +7.75V to +8.25V +5V ±5 program the offset DAC to 4000hex. V REF noted. Typical values are +25°C.) ...

Page 8

Voltage-Output DACs with Serial Interface ELECTRICAL CHARACTERISTICS—MAX5735 (-5V to +5V Output Voltage Range) (AV = +5.25V to +5.5V +5V ±5 program the offset DAC to 8000hex. V REF noted. Typical values are at ...

Page 9

Voltage-Output ELECTRICAL CHARACTERISTICS—MAX5735 (-5V to +5V Output Voltage Range) (continued) (AV = +5.25V to +5.5V +5V ±5 program the offset DAC to 8000hex. V REF noted. Typical values are +25°C.) ...

Page 10

Voltage-Output DACs with Serial Interface TIMING CHARACTERISTICS—DV (Figures 2 and +4.75V to +5.25V unless otherwise noted. Typical values are at T PARAMETER SYMBOL Serial Clock Frequency SCLK Pulse-Width High SCLK Pulse-Width Low SCLK ...

Page 11

Voltage-Output (AV = +10.5V ±5 +5V ±5 50pF referenced to ground, output gain = 2.5, T INTEGRAL NONLINEARITY vs. INPUT CODE 10k 20k 30k 40k ...

Page 12

Voltage-Output DACs with Serial Interface (AV = +10.5V ±5 +5V ±5 50pF referenced to ground, output gain = 2.5, T DIGITAL FEEDTHROUGH MAX5732 toc10 400ns/div NOISE VOLTAGE DENSITY MAX5732 toc13 1000 100 10 ...

Page 13

Voltage-Output PIN NAME TQFN TQFP Output Amplifier Positive Supply Input. Bypass OUT9 DAC9 Buffered Analog Output Voltage 3 3 OUT8 DAC8 Buffered Analog Output Voltage 4 ...

Page 14

Voltage-Output DACs with Serial Interface PIN NAME TQFN TQFP 36 42 OUT24 37 43 OUT23 40 46 OUT22 41 47 OUT21 43 50 OUT20 44 51 OUT19 45 52 OUT18 46 53 OUT17 47 54 OUT16 51 58 ...

Page 15

Voltage-Output INPUT REGISTER INPUT REGISTER INPUT REGISTER INPUT REGISTER INPUT REGISTER INPUT REGISTER DIGITAL CONTROL LOGIC Figure 1. Functional Diagram ______________________________________________________________________________________ DACs with Serial Interface DAC0 DAC0 REGISTER DAC1 DAC1 REGISTER DAC_ DAC_ REGISTER DAC30 DAC30 REGISTER DAC31 ...

Page 16

Voltage-Output DACs with Serial Interface Detailed Description The MAX5732–MAX5735 are 32-channel, 16-bit, volt- age-output DACs (Figure 1). The devices accept a 3V external reference input at REF. An internal offset DAC allows all outputs to be offset (see ...

Page 17

Voltage-Output Table 1. Offset DAC Codes PART NUMBER D15 D14 D13 MAX5732 MAX5733 MAX5734 MAX5735 Note: For the MAX5732, the maximum code for the offset DAC ...

Page 18

Voltage-Output DACs with Serial Interface C2, C1, and C0 = 010, address bits A5–A0 = 111111, and all data bits to don’t care. See Table 3 for the data format. This operation updates all DAC outputs. Note: The ...

Page 19

Voltage-Output Table 7. Address-Bit Functions ADDRESS BITS CONTROL FUNCTION DAC0 DAC1 DAC2 0 0 ...

Page 20

Voltage-Output DACs with Serial Interface Table 8. Configuration-Register Data Format D15 D14 D13 D12 D11 ERRF SING GLT DT SHDN X = Don’t care. Table 9. Configuration-Register Commands DATA BIT NAME Error flag; ERRF goes logic-high when an ...

Page 21

Voltage-Output When SING = 0 (default power-up mode), the device is in daisy-chain mode. DOUT follows DIN after 32 clock cycles. For the read command, DOUT provides the read data in the next cycle following CS rising edge. ...

Page 22

Voltage-Output DACs with Serial Interface DIN(0) W WD2 W WD1 CS W WD2 DOUT(0) DOUT(1) DOUT(2) Figure 5. Example Daisy-Chain Data Sequence W/WD0 = 32-bit word with a write command; WD0 writes data for device ...

Page 23

Voltage-Output CONTROLLER DEVICE Figure 7. Stand-Alone Configuration CONTROLLER DEVICE Figure 8. Example of a Parallel Configuration with Read-Back DIN( ...

Page 24

Voltage-Output DACs with Serial Interface DAC0 MAX5732 VOLTAGE MAX5733 REFERENCE DAC31 BITS CONTROL DSP ALGORITHM BITS ADC VOLTAGE REFERENCE Figure 10. MEMS Mirror Control Applications Information MEMS Micromirror Control The MAX5732/MAX5733 are ...

Page 25

Voltage-Output protection on their reference inputs to satisfy absolute maximum ratings. The MAX5734 features outputs that are almost rail-to-rail. This allows the AV supplies to be set to voltages within the absolute maxi- mum ratings of the PEIC. ...

Page 26

Voltage-Output DACs with Serial Interface Ordering Information (continued) OUTPUT MAX PART VOLTAGE INL (V) (LSB) MAX5732AUCB ±8 MAX5732BUCB ±16 MAX5733AUTN 0 to +10 ±8 MAX5733BUTN 0 to +10 ±16 MAX5733AUCB ...

Page 27

Voltage-Output (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information www.maxim-ic.com/packages.) ______________________________________________________________________________________ DACs with Serial Interface Package Information PACKAGE OUTLINE 56L THIN QFN, 8x8x0.8mm 21-0135 ...

Page 28

... Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. 28 ____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 © 2005 Maxim Integrated Products ...

Related keywords