EPM3064ATC44-4 Altera, EPM3064ATC44-4 Datasheet - Page 24
![IC MAX 3000A CPLD 64 44-TQFP](/photos/6/70/67053/544-44-tqfp_sml.jpg)
EPM3064ATC44-4
Manufacturer Part Number
EPM3064ATC44-4
Description
IC MAX 3000A CPLD 64 44-TQFP
Manufacturer
Altera
Series
MAX® 3000Ar
Datasheet
1.EPM3032ATC44-10N.pdf
(46 pages)
Specifications of EPM3064ATC44-4
Programmable Type
In System Programmable
Delay Time Tpd(1) Max
4.5ns
Voltage Supply - Internal
3 V ~ 3.6 V
Number Of Logic Elements/blocks
4
Number Of Macrocells
64
Number Of Gates
1250
Number Of I /o
34
Operating Temperature
0°C ~ 70°C
Mounting Type
Surface Mount
Package / Case
44-TQFP, 44-VQFP
Voltage
3.0 V ~ 3.6 V
Memory Type
EEPROM
Number Of Logic Elements/cells
4
Family Name
MAX 3000A
# Macrocells
64
Number Of Usable Gates
1250
Frequency (max)
250MHz
Propagation Delay Time
4.5ns
Number Of Logic Blocks/elements
4
# I/os (max)
34
Operating Supply Voltage (typ)
3.3V
In System Programmable
Yes
Operating Supply Voltage (min)
3V
Operating Supply Voltage (max)
3.6V
Operating Temp Range
0C to 70C
Operating Temperature Classification
Commercial
Mounting
Surface Mount
Pin Count
44
Package Type
TQFP
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Features
-
Lead Free Status / Rohs Status
Not Compliant
Other names
544-1160
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
EPM3064ATC44-4N
Manufacturer:
ALTERA
Quantity:
14
Part Number:
EPM3064ATC44-4N
Manufacturer:
ALTERA/阿尔特拉
Quantity:
20 000
MAX 3000A Programmable Logic Device Family Data Sheet
Notes to tables:
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10) The POR time for all MAX 3000A devices does not exceed 100 μs. The sufficient V
(11) These devices support in-system programming for
24
Symbol
C
C
Table 15. MAX 3000A Device Capacitance
IN
I/O
See the
Minimum DC input voltage is –0.5 V. During transitions, the inputs may undershoot to –2.0 V or overshoot to
5.75 V for input currents less than 100 mA and periods shorter than 20 ns.
All pins, including dedicated inputs, I/O pins, and JTAG pins, may be driven before V
powered.
These values are specified under the recommended operating conditions, as shown in
The parameter is measured with 50% of the outputs each sourcing the specified current. The I
to high–level TTL or CMOS output current.
The parameter is measured with 50% of the outputs each sinking the specified current. The I
low–level TTL, PCI, or CMOS output current.
This value is specified during normal device operation. During power-up, the maximum leakage current is
±300
This pull–up exists while devices are programmed in–system and in unprogrammed devices during power–up.
Capacitance is measured at 25° C and is sample–tested only. The
has a maximum capacitance of 20 pF.
3.0 V. The device is fully initialized within the POR time after V
and 0° C, contact Altera Applications.
Input pin capacitance
I/O pin capacitance
μ
A.
Operating Requirements for Altera Devices Data
Parameter
Figure 9
devices.
shows the typical output drive characteristics of MAX 3000A
V
V
IN
OUT
= 0 V, f = 1.0 MHz
= 0 V, f = 1.0 MHz
Note (9)
–40° to 100° C. For in-system programming support between –40°
Sheet.
Conditions
CCINT
OE1
pin (high–voltage pin during programming)
reaches the sufficient POR voltage level.
CCINT
Min
Table 13 on page
CCINT
voltage level for POR is
OL
Altera Corporation
and V
OH
parameter refers to
parameter refers
Max
CCIO
8
8
23.
are
Unit
pF
pF