PVZ2K203A01R00 Murata, PVZ2K203A01R00 Datasheet - Page 23

• Manufacturer Part Number: PVZ2K203A01R00
• Description: Trimmer Resistors - SMD 20K OHM SMD 2MM
• Manufacturer: Murata

Specifications of PVZ2K203A01R00

• Resistance: 20 KOhms
• Tolerance: 30 %
• Power Rating: 0.1 Watt (1/10 Watt)
• Operating Temperature Range: - 25 C to + 85 C
• Element Type: Carbon
• Number Of Turns: 1
• Product: Single-Turn Trimmer Potentiometers
• Taper: Linear
• Termination Style: SMD/SMT
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3
!Note
!Note
1. Use suitable screwdrivers that fit comfortably in
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
3. The rotational torque at the position of the
4. When using a lock paint to fix slot position,
1. Please make sure that your product has been
2. Murata cannot guarantee trimmer potentiometer
22
PVF2 Series Notice
Reflow Soldering Standard Profile
Notice (Handling)
driver slot.
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
adjustment range should not exceed the stop
strength.
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series").
Notice (Other)
evaluated and confirmed against your
specifications when our product is mounted to your
product.
integrity when used under conditions other than
those specified in this document.
Continued from the preceding page.
cleaning compatibility usually depends on the
jig construction and/or the cleaning condition
such as the depth of immersion, please check
the cleaning equipment to determine the suitable
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
230
200
100
0
Pre-heating (in the air)
60-120 sec.
For reflow soldering
(Melting zone)
30 sec. max.
Soldering
Gradual Cooling
(in the air)
Time
conditions.
If the trimmer potentiometer is cleaned by
other conditions, the trimmer potentiometer may
be damaged.
R50E13.pdf 04.6.11