ADSP-2186NBST-320 Analog Devices Inc, ADSP-2186NBST-320 Datasheet - Page 21

• Manufacturer Part Number: ADSP-2186NBST-320
• Description: IC DSP CONTROLLER 16BIT 100LQFP
• Manufacturer: Analog Devices Inc
• Series: ADSP-21xxr
• Type: Fixed Pointr

Specifications of ADSP-2186NBST-320

• Rohs Status: RoHS non-compliant
• Interface: Host Interface, Serial Port
• Clock Rate: 80MHz
• Non-volatile Memory: External
• On-chip Ram: 40kB
• Voltage - I/o: 1.8V, 2.5V, 3.3V
• Voltage - Core: 1.90V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-LQFP
• Device Core Size: 16b
• Architecture: Enhanced Harvard
• Format: Fixed Point
• Clock Freq (max): 80MHz
• Mips: 80
• Device Input Clock Speed: 80MHz
• Ram Size: 40KB
• Operating Supply Voltage (typ): 2.5/3.3V
• Operating Supply Voltage (min): 1.8V
• Operating Supply Voltage (max): 2/3.6V
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 100
• Package Type: LQFP
• Lead Free Status / Rohs Status: Not Compliant

Table 12. Unused Pin Terminations (Continued)
1
2
3
4
5
Pin Name
ERESET
EMS
EINT
ECLK
ELIN
ELOUT
CLKIN, RESET, and PF3–0/Mode D–A are not included in this table because these pins must be used.
All bidirectional pins have three-stated outputs. When the pin is configured as an output, the output is Hi-Z (high impedance) when inactive.
Hi-Z = High Impedance.
If the CLKOUT pin is not used, turn it OFF, using CLKODIS in SPORT0 autobuffer control register.
If the Interrupt/Programmable Flag pins are not used, there are two options: Option 1: When these pins are configured as INPUTS at reset and function as interrupts
and input flag pins, pull the pins High (inactive). Option 2: Program the unused pins as OUTPUTS, set them to 1 prior to enabling interrupts, and let pins float.
1
I/O
3-State
(Z)
I
O
I
I
I
O
2
Reset
State
I
O
I
I
I
O
Rev. A | Page 21 of 48 | August 2006
Hi-Z
3
Caused By
Unused Configuration
Float
Float
Float
Float
Float
Float
ADSP-218xN