JKXEP0G07FPSDP Souriau Connection Technology, JKXEP0G07FPSDP Datasheet - Page 2

• Manufacturer Part Number: JKXEP0G07FPSDP
• Description: Circular Push Pull Connectors PUSH-PULL CONNECTOR
• Manufacturer: Souriau Connection Technology
• Series: JKXr

Specifications of JKXEP0G07FPSDP

• Product Type: Connectors
• Number Of Contacts: 7
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Rev 1 – April 14, 2004
3. When assembling a plug with a protective boot, prep the cable by taking the protective
4. Attach removable contacts to wires:
boot (#6) and sliding it with the small inside diameter first onto the cable. Then slide the
small diameter end of the back nut (#5) onto the cable. Next, take the collet (#4) and slide
the end with the gripping teeth (See below) first onto the cable. Then take a cable gland
(#3) and slide it onto the cable. Once the cable gland is in place take an outer shell (#2)
and slide it onto the cable with the outside threads going onto the cable first. Then take
the flat end of a taper seat (#1) and slide that onto the cable so that the chamfer side is
pointing outward.
a. If using crimped contacts, crimp the contacts onto the ends of the exposed wires
Crimping Tool
using the proper crimping tool set on the correct AWG wire size After the contact
has been crimped to the wire, check each contact to insure that the contact is
securely crimped to the wire.
Collet
Connector Preparation