JKXEP0G07FPSDP Souriau Connection Technology, JKXEP0G07FPSDP Datasheet - Page 4

• Manufacturer Part Number: JKXEP0G07FPSDP
• Description: Circular Push Pull Connectors PUSH-PULL CONNECTOR
• Manufacturer: Souriau Connection Technology
• Series: JKXr

Specifications of JKXEP0G07FPSDP

• Product Type: Connectors
• Number Of Contacts: 7
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Rev 1 – April 14, 2004
6. Removal of Contacts:
7. Take the keyed half bushing (#9) and place it over the insulator so that the window is
8. Take the contact assembly that is mounted on the cable and using the red dot as a
9. Then push the preloaded taper seat (if a shielded cable is being used, comb out the
lined up with the key on the insulator and the key on the half bushing is pointing to the
interface end of the insulator (interface end of connector). Then take the half bushing
without the window (#9) and place on the opposite side of the insulator so that both half
bushings are aligned with each other.
reference, align the slot on the inside of the connector (#10) with the keys on the end of
the half bushings (you may need to spin the assembly slightly). Insure that the keys are
seated properly by turning the insulator and contact assembly. If the assembly does not
turn, then the keys are correctly aligned. If the assembly does turn, then you must
withdraw the assembly & realign the keys.
shielding and fold back over the taperseat) and outer shell into the connector housing and
thread the outer shell into the housing until it is hand tight and you can feel the o-ring
being compressed.
a. Using the proper extraction tool insert the tool over the front of the contact and
push contact out. Failure to use the proper extraction tool can result in damage to
the contact.
Connector Assembly