EP2S180F1508C4N Altera, EP2S180F1508C4N Datasheet - Page 83

• Manufacturer Part Number: EP2S180F1508C4N
• Description: IC STRATIX II FPGA 180K 1508FBGA
• Manufacturer: Altera
• Series: Stratix® IIr

Specifications of EP2S180F1508C4N

• Number Of Logic Elements/cells: 179400
• Number Of Labs/clbs: 8970
• Total Ram Bits: 9383040
• Number Of I /o: 1170
• Voltage - Supply: 1.15 V ~ 1.25 V
• Mounting Type: Surface Mount
• Operating Temperature: 0°C ~ 85°C
• Package / Case: 1508-FBGA
• Family Name: Stratix II
• Number Of Logic Blocks/elements: 179400
• # I/os (max): 1170
• Frequency (max): 711.24MHz
• Process Technology: 90nm (CMOS)
• Operating Supply Voltage (typ): 1.2V
• Logic Cells: 179400
• Ram Bits: 9383040
• Operating Supply Voltage (min): 1.15V
• Operating Supply Voltage (max): 1.25V
• Operating Temp Range: 0C to 85C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Pin Count: 1508
• Package Type: FC-FBGA
• For Use With: 544-1701 - DSP PRO KIT W/SII EP2S180N
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Number Of Gates: -
• Lead Free Status / Rohs Status: Compliant
• Other names: 544-1887; EP2S180F1508C4N

Figure 2–50. Control Signal Selection per IOE
Notes to
(1)
Altera Corporation
May 2007
Dedicated I/O
Clock [7..0]
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
Local
Interconnect
Control signals ce_in, ce_out, aclr/apreset, sclr/spreset, and oe can be global signals even though their
control selection multiplexers are not directly fed by the ioe_clk[7..0] signals. The ioe_clk signals can drive
the I/O local interconnect, which then drives the control selection multiplexers.
Figure
2–50:
io_oe
io_sclr
io_aclr
io_ce_out
io_ce_in
io_clk
In normal bidirectional operation, the input register can be used for input
data requiring fast setup times. The input register can have its own clock
input and clock enable separate from the OE and output registers. The
output register can be used for data requiring fast clock-to-output
performance. The OE register can be used for fast clock-to-output enable
timing. The OE and output register share the same clock source and the
same clock enable source from local interconnect in the associated LAB,
dedicated I/O clocks, and the column and row interconnects.
clk_in
clk_out
ce_in
Stratix II Device Handbook, Volume 1
ce_out
aclr/apreset
Stratix II Architecture
sclr/spreset
oe
2–75