AT40K10LV-3AJC Atmel, AT40K10LV-3AJC Datasheet - Page 14
![IC FPGA 3.3V 576 CELL 84-PLCC](/photos/6/70/67047/453-84-plcc_sml.jpg)
AT40K10LV-3AJC
Manufacturer Part Number
AT40K10LV-3AJC
Description
IC FPGA 3.3V 576 CELL 84-PLCC
Manufacturer
Atmel
Series
AT40K/KLVr
Datasheet
1.AT40K05-2BQC.pdf
(67 pages)
Specifications of AT40K10LV-3AJC
Number Of Logic Elements/cells
576
Total Ram Bits
4608
Number Of I /o
62
Number Of Gates
20000
Voltage - Supply
3 V ~ 3.6 V
Mounting Type
Surface Mount
Operating Temperature
0°C ~ 70°C
Package / Case
84-PLCC
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Number Of Labs/clbs
-
Clocking Scheme
There are eight Global Clock buses (GCK1 - GCK8) on the AT40K/AT40KLV FPGA.
Each of the eight dedicated Global Clock buses is connected to one of the dual-use Glo-
bal Clock pins. Any clocks used in the design should use global clocks where possible:
this can be done by using Assign Pin Locks to lock the clocks to the Global Clock loca-
tions. In addition to the eight Global Clocks, there are four Fast Clocks (FCK1 - FCK4),
two per edge column of the array for PCI specification.
Each column of an array has a “Column Clock mux” and a “Sector Clock mux”. The Col-
umn Clock mux is at the top of every column of an array and the Sector Clock mux is at
every four cells. The Column Clock mux is selected from one of the eight Global Clock
buses. The clock provided to each sector column of four cells is inverted, non-inverted
or tied off to “0”, using the Sector Clock mux to minimize the power consumption in a
sector that has no clocks. The clock can either come from the Column Clock or from the
Plane 4 express bus, see Figure 10 on page 15. The extreme-left Column Clock mux
has two additional inputs, FCK1 and FCK2, to provide fast clocking to left-side I/Os. The
extreme-right Column Clock mux has two additional inputs as well, FCK3 and FCK4, to
provide fast clocking to right-side I/Os.
The register in each cell is triggered on a rising clock edge by default. Before configura-
tion on power-up, constant “0” is provided to each register’s clock pins. After
configuration on power-up, the registers either set or reset, depending on the user’s
choice.
The clocking scheme is designed to allow efficient use of multiple clocks with low clock
skew, both within a column and across the core cell array.
AT40K/AT40KLV Series FPGA
14
0896C–FPGA–04/02