20-101-1154 Rabbit Semiconductor, 20-101-1154 Datasheet - Page 14

• Manufacturer Part Number: 20-101-1154
• Description: MODULE RCM4120 RABBITCORE
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1154

• Module/board Type: MPU Core Module
• Product: Microcontroller Modules
• Core Processor: Rabbit 4000
• Flash: 512 KBytes
• Operating Supply Voltage: 3 to 3.6 V
• Board Size: 48 mm x 36 mm x 12 mm
• For Use With/related Products: RCM4120
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1122

2.2.3 Step 3 — Connect Programming Cable
The programming cable connects the module to the PC running Dynamic C to download
programs and to monitor the module during debugging.
Connect the 10-pin connector of the programming cable labeled
the RCM4100 as shown in Figure 4. Be sure to orient the marked (usually red) edge of the
cable towards pin 1 of the connector. (Do not use the
normal serial connection.)
Depending on the programming cable, connect the other end to a COM port or a USB port
on your PC.
10
NOTE: Never disconnect the programming cable by pulling on the ribbon cable.
NOTE: Either a serial or a USB programming cable was supplied with this Development
Carefully pull on the connector to remove it from the header.
Kit. If you have a serial programming cable, an RS-232/USB converter (Rabbit Part
No. 20-151-0178) is available to allow you to use the serial programming cable with a
USB port.
Figure 4. Connect Programming Cable and Power Supply
DIAG
connector, which is used for a
PROG
RabbitCore RCM4100
to header J1 on