20-101-1217 Rabbit Semiconductor, 20-101-1217 Datasheet - Page 19

• Manufacturer Part Number: 20-101-1217
• Description: MODULE RABBITCORE RCM3229
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-1217

• Module/board Type: MPU Core Module
• For Use With/related Products: RCM3229
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1146

2.2.2.2 RCM3200 and RCM3220
Connect the 10-pin connector of the programming cable labeled
the RCM3200 module as shown in Figure 3(b). Be sure to orient the marked (usually red)
edge of the cable towards pin 1 of the connector. (Do not use the
used for a normal serial connection.)
Connect the other end of the programming cable to a COM port on your PC.
User’s Manual
NOTE: Be sure to use the serial programming cable (part number 101-0542)—the pro-
NOTE: It may be possible to use an RS-232/USB converter with the serial programming
gramming cable has blue shrink wrap around the RS-232 converter section located in
the middle of the cable. The USB programming cable and programming cables with red
or clear shrink wrap from other Rabbit kits are not designed to work with
RCM3200/RCM3220 modules.
described in this section. An RS-232/USB converter (part number 20-151-0178) is
available through the
Dynamic C.
Figure 3(b). Connect Programming Cable to RCM3200
Web
store. Note that not all RS-232/USB converters work with
DIAG
PROG
connector, which is
to header J3 on
13