20-101-1307 Rabbit Semiconductor, 20-101-1307 Datasheet - Page 101

• Manufacturer Part Number: 20-101-1307
• Description: CORE MODULE RCM5760
• Manufacturer: Rabbit Semiconductor
• Type: Serial to Ethernetr

Specifications of 20-101-1307

• Module/board Type: MPU Core Module
• Number Of I/os: 32
• Ethernet Connection Type: 10/100 Base-T with RJ-45
• Memory Type: Flash
• Interface Type: Ethernet
• Operating Voltage: 3.3 V
• Operating Current: 200 mA
• Operating Temperature Range: - 40 C to + 85 C
• Board Size: 30 mm x 51 mm x 3 mm
• Product: Modules
• For Use With/related Products: RCM5760
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1182

F.5 Run the PINGME.C Sample Program
Connect the crossover cable from your computer’s Ethernet port to the MiniCore module’s RJ-45
Ethernet connector. Open this sample program from the
the program, and start it running under Dynamic C. The crossover cable is connected from your
computer’s Ethernet adapter to the MiniCore module’s RJ-45 Ethernet connector. When the pro-
gram starts running, the green
Ethernet connection is made. (Note: If the
over cable, or if you are using a hub with straight-through cables perhaps the power is off on the
hub.)
The next step is to ping the module from your PC. This can be done by bringing up the MS-DOS
window and running the pingme program:
or by
and typing the entry
The ping routine will ping the module four times and write a summary message on the screen
describing the operation.
MiniCore RCM5700/RCM6700 User’s Manual
Start > Run
ping 10.10.6.101
ping 10.10.6.101
LINK
light on the MiniCore module should be on to indicate an
rabbit.com
LNK
light does not light, you may not be using a cross-
SAMPLES\TCPIP\ICMP
folder, compile
101