20-101-0709 Rabbit Semiconductor, 20-101-0709 Datasheet - Page 54

• Manufacturer Part Number: 20-101-0709
• Description: INTERFACE GRAPHIC DISPLAY OP6700
• Manufacturer: Rabbit Semiconductor

Specifications of 20-101-0709

• Module/board Type: Single Board Computer Module
• For Use With/related Products: OP6700
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 20-101-709; 20-101-709

5.4 How to Set Up Your Computer’s IP Address For Direct Connect
When your computer is connected directly to the Intellicom board via an Ethernet connec-
tion, you need to assign an IP address to your computer. To assign the PC the address
10.10.6.101
Click on
ble-click the Network icon. Depending on which version of Windows you are using, look
for the
click on this line or select
up the TCP/IP properties dialog box. You can edit the IP address and the subnet mask
directly. (Disable “obtain an IP address automatically.”) You may want to write down the
existing values in case you have to restore them later. It is not necessary to edit the gate-
way address since the gateway is not used with direct connect.
50
TCP/IP Protocol
Start > Settings > Control Panel
IP 10.10.6.101
Netmask
255.255.255.0
with the netmask
Direct Connection PC to Intellicom Board
/
Network > Dial-Up Connections
Properties
255.255.255.0
User’s PC
Ethernet
crossover
cable
or
Local Area Connection > Properties
to bring up the Control Panel, and then dou-
, do the following.
Intellicom
Board
/
Network
Intellicom (OP6600/OP6700)
line or tab. Double-
to bring