XS1-L01A-LQ64-C4 XMOS, XS1-L01A-LQ64-C4 Datasheet - Page 12

• Manufacturer Part Number: XS1-L01A-LQ64-C4
• Description: IC MPU 32BIT SINGLE CORE 64LQFP
• Manufacturer: XMOS

Specifications of XS1-L01A-LQ64-C4

• Processor Type: XCore 32-Bit
• Speed: 400MHz
• Voltage: 0.95 V ~ 1.05 V
• Mounting Type: Surface Mount
• Package / Case: 64-LQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: 880-1000; XS1-L01-LQ64-C4

XS1-L1 64LQFP Datasheet (2.1)
4.3 ESD Stress Voltage
4.4 Reset Timing
4.5 Power Supply
4.5.1 Power Supply Sequencing
To ensure correct device operation, the VDDIO supply should be present before the
VDD supply. Specifically, the VDDIO supply should rise to its nominal operating
4.5.2 Power Consumption
The power consumption of the XS1-L1 is highly application dependant. The following
Notes:
Power is applied to the device through the VDDIO and VDD pins. Several pins of
each type are provided to minimize the effect of inductance within the package. All
supply pins must be connected. Each supply should be decoupled close to the chip
by several 100nF low inductance (for example, ceramic) capacitors between VDDIO
and GND, and VDD and GND.
Input voltages must not exceed specification with respect to VDDIO, VDD and GND,
even during power up and power down ramping. Permanent damage can occur if the
operation exceeds these ranges.
range with VDD held at 0V. The VDD supply should then rise to its nominal operating
range with a rise time of less than 10ms.
Core power consumption
figures should be used for budgetary purposes only:
ESD Model
HBM
MM
Parameters
Reset pulse width
Initialisation time
1. This parameter shows the time taken to start booting after RST_N has gone high.
ESD Stress Voltage
2.0 KV
200 V
www.xmos.com
MIN
100
TYP
MAX
150
UNITS
ns
us
Notes
1
Notes
12/24