MPC8347VRADDB Freescale Semiconductor, MPC8347VRADDB Datasheet - Page 67

• Manufacturer Part Number: MPC8347VRADDB
• Description: IC MPU POWERQUICC II 620-PBGA
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC II PROr

Specifications of MPC8347VRADDB

• Processor Type: MPC83xx PowerQUICC II Pro 32-Bit
• Speed: 266MHz
• Voltage: 1.2V
• Mounting Type: Surface Mount
• Package / Case: 620-PBGA
• Processor Series: MPC8xxx
• Core: e300
• Data Bus Width: 32 bit
• Development Tools By Supplier: MPC8349E-MITXE
• Maximum Clock Frequency: 266 MHz
• Maximum Operating Temperature: + 105 C
• Mounting Style: SMD/SMT
• I/o Voltage: 1.8 V, 2.5 V, 3.3 V
• Minimum Operating Temperature: 0 C
• Core Size: 32 Bit
• Program Memory Size: 64KB
• Cpu Speed: 266MHz
• Embedded Interface Type: I2C, SPI, USB, UART
• Digital Ic Case Style: BGA
• No. Of Pins: 672
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Table 52
Freescale Semiconductor
NC
Notes:
1. This pin is an open-drain signal. A weak pull-up resistor (1 kΩ) should be placed on this pin to OV
2. This pin is an open-drain signal. A weak pull-up resistor (2–10 kΩ) should be placed on this pin to OV
3. During reset, this output is actively driven rather than three-stated.
4. These JTAG pins have weak internal pull-up P-FETs that are always enabled.
5. This pin should have a weak pull-up if the chip is in PCI host mode. Follow the PCI specifications.
6. This pin must always be tied to GND.
7. This pin must always be pulled up to OV
8. This pin must always be left not connected.
9. Thermal sensitive resistor.
10.It is recommended that MDIC0 be tied to GRD using an 18 Ω resistor and MDIC1 be tied to DDR power using an 18 Ω
11.TSEC1_TXD[3] is required an external pull-up resistor. For proper functionality of the device, this pin must be pulled up or
PCI1_INTA/IRQ_OUT
PCI1_RESET_OUT
PCI1_AD[31:0]
PCI1_C/BE[3:0]
PCI1_PAR
PCI1_FRAME
PCI1_TRDY
resistor.
actively driven high during a hard reset. No external pull-down resistors are allowed to be attached to this net.
provides the pinout listing for the MPC8347E, 620 PBGA package.
MPC8347E PowerQUICC™ II Pro Integrated Host Processor Hardware Specifications, Rev. 11
Signal
Signal
Table 51. MPC8347E (TBGA) Pinout Listing (continued)
Table 52. MPC8347E (PBGA) Pinout Listing
DD
.
W32, AA31, AA32, AA33, AA34,
AB31, AB32, AB33, AB34, AC29,
AC31, AC33, AC34, AD30, AD32,
AD33, AD34, AE29, AE30, AH32,
AH33, AH34, AM33, AJ31, AJ32,
AJ33, AJ34, AK32, AK33, AK34,
AM34, AL33, AL34, AK31, AH30,
AC32, AE32, AH31, AL32, AG34,
AE33, AF32, AE34, AF34, AF33,
AG33, AG32, AL11, AM11, AP10, Y32,
Y34, Y31, Y33
D20
B21
E19, D17, A16, A18, B17, B16, D16,
B18, E17, E16, A15, C16, D15, D14,
C14, A12, D12, B11, C11, E12, A10,
C10, A9, E11, E10, B9, B8, D9, A8,
C9, D8, C8
A17, A14, A11, B10
D13
B14
A13
No Connection
Package Pin Number
Package Pin Number
PCI
Pin Type
Pin Type
I/O
I/O
I/O
I/O
I/O
—
O
O
DD
.
DD
Supply
Supply
Power
Power
OV
OV
OV
OV
OV
OV
OV
.
—
DD
DD
DD
DD
DD
DD
DD
Notes
Notes
2
5
5
67