MPC8347ZUAJFB Freescale Semiconductor, MPC8347ZUAJFB Datasheet - Page 75

• Manufacturer Part Number: MPC8347ZUAJFB
• Description: IC MPU PWRQUICC II 672-TBGA
• Manufacturer: Freescale Semiconductor

Specifications of MPC8347ZUAJFB

• Processor Type: MPC83xx PowerQUICC II Pro 32-Bit
• Speed: 533MHz
• Voltage: 1.2V
• Mounting Type: Surface Mount
• Package / Case: 672-TBGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Features: -

Freescale Semiconductor
MVREF1
MVREF2
NC
Notes:
1. This pin is an open-drain signal. A weak pull-up resistor (1 kΩ) should be placed on this pin to OV
2. This pin is an open-drain signal. A weak pull-up resistor (2–10 kΩ) should be placed on this pin to OV
3. During reset, this output is actively driven rather than three-stated.
4. These JTAG pins have weak internal pull-up P-FETs that are always enabled.
5. This pin should have a weak pull-up if the chip is in PCI host mode. Follow the PCI specifications.
6. This pin must always be tied to GND.
7. This pin must always be left not connected.
8. Thermal sensitive resistor.
9. It is recommended that MDIC0 be tied to GRD using an 18 Ω resistor and MDIC1 be tied to DDR power using an 18 Ω resistor.
10.TSEC1_TXD[3] is required an external pull-up resistor. For proper functionality of the device, this pin must be pulled up or
actively driven high during a hard reset. No external pull-down resistors are allowed to be attached to this net.
MPC8347E PowerQUICC™ II Pro Integrated Host Processor Hardware Specifications, Rev. 11
Signal
Table 52. MPC8347E (PBGA) Pinout Listing (continued)
AF19
AE10
V1, V2, V5
No Connection
Package Pin Number
Pin Type
I
I
DD
.
DD
reference
reference
Supply
voltage
voltage
Power
.
DDR
DDR
Notes
75