AD1888JCP-REEL Analog Devices Inc, AD1888JCP-REEL Datasheet - Page 29

• Manufacturer Part Number: AD1888JCP-REEL
• Description: IC CODEC AUDIO-PC AC'97 48LFCSP
• Manufacturer: Analog Devices Inc
• Series: SoundMAX®r
• Type: Audio Codec '97r

Specifications of AD1888JCP-REEL

• Data Interface: Serial
• Resolution (bits): 16, 20 b
• Number Of Adcs / Dacs: 2 / 6
• Sigma Delta: No
• Dynamic Range, Adcs / Dacs (db) Typ: 80 / 90
• Voltage - Supply, Analog: 4.75 V ~ 5.25 V
• Voltage - Supply, Digital: 3.15 V ~ 3.45 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Surface Mount
• Package / Case: 48-VFQFN, CSP Exposed Pad
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

DMIX[1:0]
HPSEL
CLDIS
LODIS
MSPLT
AC97NC
DACZ
Down Mix Mode Select. Provides analog down-mixing of the center, LFE, and/or surround channels into the mixer channels.
This allows the full content of 5.1 or quad media to be played through stereo headphones or speakers.
Note that the Jack Sense pins can also be set up to control (gate) this function depending on the JS0DMX and JS1DMX Bits (see
Register 72h).
The upper bit allows forcing the down-mix function:
DMIX[1] = 0, no down-mix unless activated by the Jack Sense and JSxDMX bits (default).
DMIX[1] = 1, forces down-mix function.
The lower bit selects the down-mix type:
DMIX[0] = 0, selects 6-to-4 down-mix. The center and LFE channels are summed equally into the mixer left and right channels
(default).
DMIX[0] = 1, selects 6-to-2 down-mix. The surround left and right channels are summed into the mixer left and right channels.
Default for DMIX[1:0] is 00.
Headphone Amplifier Input Select. This bit allows the headphone power amps to be driven from the surround DACs or from
the mixer outputs. There are two reasons for this: one is to allow 2-channel media to use the higher power headphone
amplifiers available on the SURR/HP_OUT outputs; the other is to allow spreading of 2-channel media to the surround outputs.
Together with the LOSEL bit (see above), this bit also provides for analog swapping of the mixer (front) and surround outputs.
0 = SURR_OUT/HP_OUToutputs are driven by the surround DACs (reset default).
1 = SURR_OUT/HP_OUToutputs are driven by the mixer outputs.
Center and LFE Disable. Disables the center and LFE output pins, placing them into High-Z mode so that the assigned output
audio jack(s) can be shared for MIC inputs or other functions.
0 = Center and LFE output pins have normal audio drive capability (reset default).
1 = Center and LFE output pins are placed into High-Z mode.
Line_out Disable. Disables the Line_out pins (L/R), placing them into High-Z mode so that the assigned output audio jack can
be shared for Line Input function.
0 = Line_out pins have normal audio drive capability (reset default).
1 = Line_out pins are placed into High-Z mode.
Mute Split. Allows separate mute control bits for master, HP, Line_in, CD, PCM OUT, and record volume/gain control registers.
0 = Both left and right channel mutes are controlled by Bit D15 in the respective registers (reset default).
1 = Bit D15 affects only the left channel mute and Bit D7 affects only the right channel mute.
AC ’97 No Compatibility Mode. This bit allows the surround, center, and LFE volume control registers and output attenuators to
operate in a more functional mode than defined by the AC97 2.2 spec. This is called ADI compatibility mode.
In AC ’97 compatibility mode, the DAC gain/attenuators for the surround, center, and LFE are controlled by Register 18h (PCM
volume). The output pin attenuators for the surround are controlled by Register 38h, and the output pin attenuators for the
center and LFE are controlled by Register 36h.
In ADI compatibility mode, the Surround DAC gain/attenuators are controlled by Register 38h, and the Center/LFE DACs are
controlled by Register 36h.
The output pin attenuators for Center/LFE are controlled by Register 02h (Master Volume), and the output pin attenuators for
Surround are controlled by Register 04h.
0 = AC97 compatibility mode (reset default).
1 = ADI compatibility mode.
DAC Zero-Fill. Determines DAC data fill under starved condition.
0 = DAC data is repeated when DACs are starved for data (reset default).
1 = DAC data is zero-filled when DACs are starved for data.
Rev. A | Page 29 of 32
AD1888