DSO1024A Agilent Technologies Test Equipment, DSO1024A Datasheet - Page 4

• Manufacturer Part Number: DSO1024A
• Description: Oscilloscope, 4 Channels, 200 MHz
• Manufacturer: Agilent Technologies Test Equipment
• Type: Digitalr

Specifications of DSO1024A

• Bandwidth: 200 MHz
• Bandwidth Limit: 20 MHz
• Bandwidth, 3 Db: 200 MHz
• Brand/series: DSO 1000 Series
• Configuration: Bench/Portable
• Dimensions: 12.78 × 6.21 × 5.08 In. (W × H × D)
• Display Type: Color TFT LCD
• Gain, Voltage: 2 mV/div to 5 mV/div: ±4% full scale10 mV/div to 5 mV/div: ±3% full scale
• Input Impedance: 1 MΩ ±1% in parallel with 18 pF ±3 pF
• Memory: 20 Kpts
• Number Of Channels: 4
• Sample Rate: 2 GS/s

More capabilities
23 automatic measurements
All 1000 Series scopes come equipped with 23 automatic voltage, time and frequency mea-
surements. Press the Measure key to bring up the three you use most often or display all
single-channel measurements on the screen simultaneously.
Sequence mode for easier debug
Record up to 1000 occurrences of a trigger event and then play them back to easily spot
glitches or other anomalies for further examination. Store the waveforms to internal or exter-
nal memory (USB fl ash drive).
Digital fi ltering on waveforms
Apply a real-time digital fi lter of your choice to the source waveform to eliminate unwanted
frequencies from your display. Digital fi ltering selections include low-pass, high-pass, band-
pass and band-reject fi lters. Frequency limits are selectable between 250 Hz and the full
bandwidth of your oscilloscope.
Advanced triggering
Triggering options for the 1000 Series include edge, pulse width, composite video, pattern and
alternate channel trigger modes. These modes ensure that you can capture and view hard-to-
fi nd signal conditions.
Remote programming
For remote instrument control over the built-in USB interface, utilize Agilent’s I/O library or
National Instrument’s instrument drivers for the 1000 Series scope in your application. The
drivers take full advantage of industry-accepted standards and are compatible with many ap-
plication development environments, such as Agilent VEE Pro, National Instrument’s LabView
and LabWindows/CVI.
4
Feel like you’re using a much higher-priced scope:
• 23 automatic measurements give you quick access to powerful functions
• Unique to its class, sequence mode allows easy debug with waveform recording, playback
• Selectable band pass fi ltering eliminates unwanted signals
• Advanced triggering makes it simple to capture and view elusive signals
and storage
Figure 7. Display all single-channel
measurements on screen simultaneously.
Figure 8. Use sequence mode to record up to
1000 triggers and review in playback mode
for anomalies.
Figure 9. Apply a low-pass digital fi lter to
transform the noisy waveform on channel
1 (yellow) into the clean waveform on
channel 2 (green).
Segment 1
Segment 2
Segment 1000